Search results for anycubic

Anycubic 4Max Pro Review: Is It Right For You?

Anyone working with 3D printers or who is interested in 3D printing has probably heard of Anycubic 3D Printers. The Chinese company is known for giving hobbyists the best value for their money with 3D printers with a long list of features, some of the newest technologies, and a price tag that everyone would love.

The company came out with Anycubic 4Max Pro, which helped them cater to the younger set, the beginners, and the education market. This 3D printer wowed the market because of the following characteristics:

  • Generous build volumes
  • Works with a variety of materials
  • Fast printing speeds
  • Teal and black color scheme for the body
  • Safe and easy to use

Should you buy the Anycubic 4Max Pro? Grab a chair and continue reading as we tell you everything about this 3D printer and help you decide if it’s for you.

Anycubic 4Max Pro: What You Need to Know

Anycubic has been coming out with some of the best yet affordable 3D printers of late. One of the printers that fall under this category is the Anycubic 4Max Pro.

You have probably heard about the manufacturer before because of their Anycubic Photon and the i3 Mega. The 4Max Pro is an improvement of the company’s original 4Max, which was released in 2018.

The 4Max Pro, however, has a different look from the original.

Design

One of the first things you will notice about the Anycubic 4Max Pro is that it doesn’t look like the others. With a teal and black color scheme, it’s easy to tell it apart from other similar 3D printers.

The manufacturer also made the Anycubic 4Max Pro more intuitive and safer to use than the original 4Max. The full enclosure ensures that you don’t get in contact with the moving or the hot parts.

This 3D printer has a 3.5-inch (88.9 millimeters) touch display. And this touch screen is easily accessible.

The 4Max Pro measures 17.8 by 18.3 by 16.1 inches (454 by 466 by 410 millimeters) and weighs around 49.6 pounds (22.5 kilograms).

Features

The 4Max Pro uses the Anycubic Ultrabase bed. This heated bed has small holes in the coating, which gives it more adhesion — no more failed prints because your model toppled over. What’s more, finished objects are easily removed.

Printing speeds are rated at around 0.79 to 3.14 inches (20 to 80 millimeters) per second. The extruder can get as hot as 500 degrees Fahrenheit (260 degrees Celsius). That means that this printer can handle a wide variety of filaments, including:

  • PLA
  • ABS
  • HIPS
  • TPU

The printer also has an auto-shutdown feature that turns the machine off when your printing job is done. It will further inform you when it’s time to swap out the filament when it runs out.

Who Should Buy the Anycubic 4Max Pro?

Beginners and hobbyists looking for a capable yet affordable 3D printer would do well with the Anycubic 4Max Pro. This fused deposition modeling printer is also superb for educational purposes.

This entry-level 3D printer is a good fit for those who are looking for affordable and eye-catching devices.

The Technical Specifications at a Glance

  • FDM Printer
  • Single Extruder
  • Printer Dimensions: 17.8 by 18.3 by 16.1 inches (454 by 466 by 410 millimeters)
  • Build Size: 10.6 by 8.1 by 8.1 inches (270 by 205 by 205 millimeters)
  • Layer Resolution: 0.05 to 0.3 millimeters
  • X-axis Accuracy: 0.01 millimeters
  • Y-axis Accuracy 0.0125 millimeters
  • Z-axis Accuracy: 0.00125 millimeters
  • Nozzle Diameter: 0.4 millimeters
  • Filament Diameter: 1.75 millimeters
  • Print Speed: 0.79 to 3.14 inches (20 to 80 millimeters per second)
  • Materials:
    • PLA
    • ABS
    • TPU
    • HIPS
  • Compatible with exotic filaments
  • Maximum Temperature for the Extruder: 500 degrees Fahrenheit (260 degrees Celsius)
  • Maximum Temperature for the Print Bed: 212 degrees Fahrenheit (100 degrees Celsius)
  • Compatible Slicer: Cura, Smplify3D, Repetier-HOST
  • Input Formats:
    • .STL
    • .OBJ
    • JPG
    • PNG
  • Output Formats: GCode
  • Connectivity: SD card and USB

What You Will Love about the Anycubic 4Max Pro

Perhaps the most obvious things you’d love about this 3D printer are its low price and capabilities. With a sizable print area, you will find it challenging to find another printer in its price range that can match the Anycubic 4Max Pro.

This 3D printer is also a good fit for looking for a 3D printer that isn’t an all-black affair or plasticky looking. The teal body with black frames makes this 3D printer not only different in its looks but stylishly chic as well. That’s something that you don’t hear about 3D printers, which are mainly described as drab and utilitarian.

You will also appreciate the large and responsive touch display. This one is easy to use, and the menus are intuitive. It’s also easily accessible because of its location at the top of the 3D printer, rather than hidden away at the bottom like what you see on most other printers.

This 3D printer works quietly, and its enclosure keeps the noise levels down even more. Speaking of the enclosure, it also keeps the noxious odors of the melted filaments in, while keeping the prying hands of kids out of the printer.

Before You Buy: The Downsides of Anycubic 4Max Pro

The Anycubic 4Max Pro comes to you almost completely assembled, but you will still need to fit some of the pieces in before you can use it for the first time.

It’s a set of simple tasks, however. You only have to put in the filament sensor and the spool holder, and then proceed to level the printing bed and then insert the SD card.

At its price, it’s not surprising that the Anycubic 4Max Pro lacks some of the features that we’ve come to expect from today’s 3D printers, such as automatic bed leveling and Wi-Fi connectivity. These and other similar features make using a 3D printer a whole lot more pleasant. As such, using the 4Max Pro might be a bit more cumbersome than other machines.

Anycubic 4Max Pro Alternatives

The biggest draw of the Anycubic 4Max Pro is that it’s an affordable 3D printer with many capabilities for its price. The somewhat stylish printer is easy to use, making it perfect for beginners. However, the manufacturer has discontinued it, and you might not easily find it sold by different retailers.

So what are the alternatives? You can check out:

Anycubic 4Max Pro 2.0

The Chinese company gives you another option: the newer Anycubic 4Max Pro 2.0. How is it any different from the 4Max Pro?

First, the printer is no longer colorful with its all-black exterior. It also sports a dual gear extrusion, and the direct drive helps it be more precise and less prone to slippage.

The 4Max Pro 2.0 also has very quiet stepper drives, an upgraded fan, and dual z-axis motors.

However, the newer 4Max Pro 2.0 has a smaller build area of 10.6 by 8.3 by 7.4 inches (270 by 210 by 190 millimeters).

Qidi Tech X-Pro

If you’re trying to break away from Anycubic, another Chinese-made printer might catch your fancy: Qidi Tech X-Pro. This may cost a bit more money than the original Anycubic 4Max Pro, but it is still a low-priced dual extrusion 3D printer that works more than just fine.

The Qidi Tech X-Pro also has a full enclosure that keeps the temperatures constant for better prints while keeping the odors from permeating throughout your room.

This 3D printer uses an aluminum heated bed that partners with a magnetic build plate to keep your models in place.

However, it does have a smaller build volume at 9.05 by 5.9 by 5.9 inches (230 by 150 by 150 millimeters). Also, the manufacturer has its own slicing software: Qidi Print, which means you will not be able to use any other software that you’re more used to.

The good news is that Qidi Print is easy to use and allows you to customize your prints. So if you’re new to 3D printing, you can use this slicer program and learn it in an instant.

Monoprice MP Voxel

Another 3D printer that’s worth mentioning and also has a full enclosure is the Monoprice MP Voxel. This 3D printer has a long list of usability features that you will want to know.

First off, you don’t have to spend a lot on this printer. It costs less than $400. For that money, you will get a cube printer that has Wi-Fi, an intuitive touchscreen menu, and a smart-looking 3D printer you’d be proud to put on display.

The set-up is very quick. You can take this printer out of the box and be ready to print in no time. What’s more, it uses a flexible build plate that makes it easier for you to remove the finished models without using sharp tools to pry them off.

You set the printer’s settings using the touch display. Plus, you get to see everything as it happens.

The Monoprice MP Voxel has a transparent plastic covering three sides, so you get to keep an eye on your prints. And to help you do that, an array of LEDs shines a light on things. You can also rely on the embedded camera to see your model while it is being printed, even when you’re not at home via the Polar Cloud app.

However, the build volume for this printer is less than the other printers we have here: it can print objects of up to 5.9 by 5.9 inches (150 by 150 millimeters). You should also be aware that the printer uses non-standard G-code, which means you cannot use the slicing program you want.

However, the big picture is that this affordable machine delivers everything you would want in a 3D printer. It’s perfect for beginners and first-timers to get their feet wet with 3D printing without having to spend a lot of money.

Bottom Line

For its price and capabilities, it is not difficult to recommend the Anycubic 4Max Pro. It’s just obvious that it’s one of the best 3D printers to come out from a company that’s known for launching great printers.

It’s a user-friendly printer that you can buy for kids so that they’d be interested in 3D printing and create their own models.

Pros

  • Quiet
  • Generous build volume
  • Great features for its price
  • Intuitive to use, responsive, and large touch display
  • Ultrabase heated bed gives more adhesion for your models
  • Easy to use

Cons

  • No automatic bed leveling
  • Some assembly required
  • No Wi-Fi connectivity

Frequently Asked Questions

Here are our replies to the questions you asked! Keep on sending your comments and questions about 3D printing and 3D printers!

Question: What Is Extruder Temperature?

Answer: When choosing an FDM 3D printer, you will see extruder temperature as one of the specifications being bannered about by the manufacturer. Extruder temperature is simply an indicator of how hot the extruder can get.

The rated temperature will tell you what types of filaments are compatible with your printer. Most of the filaments out there is thermoplastic, but they require different temperatures to properly melt.

Filaments need to be melted. You cannot do much with the stiff, brittle string-like filaments unless they are heated up and melted into the rubbery substance that can be pushed out of the 3D printer’s extruder.

To give you an idea, this table will list some of the most popular filament types and their ideal extruder temperature:

  • PLA: 356 to 446 degrees Fahrenheit (180 to 230 degrees Celsius)
  • ABS: 410 to 482 degrees Fahrenheit (210 to 250 degrees Celsius)
  • PETG: 428 to 482 degrees Fahrenheit (220 to 250 degrees Celsius)
  • Nylon: 464 to 500 degrees Fahrenheit (240 to 260 degrees Celsius)
  • TPU: 410 to 446 degrees Fahrenheit (210 to 230 degrees Celsius)

This means that if your 3D printer has a rated extruder temperature of 356 degrees Fahrenheit (180 degrees Celsius), the only type of filament that you can use among these four is a PLA material. Even then, it’s not an ideal temperature as PLA works best at around 410 degrees Fahrenheit (210 degrees Celsius)

Question: Do you need a heated bed?

Answer: A heated bed is one of the many conveniences that suitable 3D printers give you. It helps your models stay in place so that it doesn’t fall over or rotate in place.

As such, you don’t have to worry too much about your prints failing. Like the extrusion temperature, different filaments will have different requirements for the temperature of the heated bed.

The good news is that PETG and PLA both don’t need heated beds. But other filaments do:

  • ABS: 176 to 230 degrees Fahrenheit (80 to 110 degrees Celsius)
  • Nylon: 158 to 212 degrees Fahrenheit (70 to 100 degrees Celsius)
  • TPU: 86 to 140 degrees Fahrenheit (30 to 60 degrees Celsius)

Should You Buy the Anycubic 4Max Pro?

There is no doubt that the Anycubic 4Max Pro is one excellent 3D printer, especially if you take into consideration just how affordable it is. However, this printer is rather old, and Anycubic has discontinued production.

As such, it may be a bit difficult to find a retailer that’s still selling this 3D printer. If you are willing to get an alternative, there are some tradeoffs.

These newer 3D printers might have more advanced technologies and more features, but they have smaller build volumes. As a whole, the Anycubic 4Max Pro has the right combination of price, build volume and a long list of features that make it an excellent printer for beginners.

8 Best Anycubic 3D Printer Options to Consider in 2021

Best Anycubic 3D Printer

Anycubic is a Chinese 3D printer manufacturer, and in this guide, we’ll be taking a close look at the best Anycubic 3D printers that are on the market right now.

As they produce many different printers with various features, figuring out by yourself which one to purchase can be very daunting. Luckily, we are here to help. We will detail the top printers from Anycubic, show you their pros and cons, and discover which 3D printer is the best overall.

Firstly, here’s a quick snapshot of the eight best 3D printers from Anycubic.

At a Glance: 8 of the Best Anycubic 3D printers in 2021

Anycubic 3D printer Best for… Printer type Build volume More Info
Photon Mono X Best overall 3D printer Resin 192mm x 120mm x 245mm Find out more
Mega S 3D Best for easy assembly FDM 210mm x 210mm x 205mm x Find out more
Photon Best for a compact size Resin 115mm x 65mm x 155mm Find out more
Photon S Best for beginners Resin 115mm x 65mm x 165mm Find out more
Chiron Best for build volume FDM 400mm x 400mm x 450mm Find out more
4Max Pro Best for printing with metal FFF 270mm x 210mm x 190mm Find out more
Predator Best for print speed FDM 370mm x 370mm x 455mm Find out more
Photon Zero Best budget 3D printer Resin 115mm x 65mm x 155mcm Find out more

Reasons to consider Anycubic 3D printers

You might have heard of Anycubic if you are looking for a 3D printer, but why should you consider using their products?

Cost-effective 3D printers

Cheaper doesn’t always mean you are getting a good deal, but if you can save a few dollars on a great product, why pay extra money when you don’t need to?

Many 3D printers that Anycubic manufactures and sells are available for a lower price than you find with other brands. They are a Chinese-based company, which is reflected in their pricing structure.

Don’t get us wrong, you can find expensive 3D printers from Anycubic, but their budget models offer better value than many other brands.

Variety of 3D printers

As you will find out, as we go down our list of the top Anycubic 3D printers, they produce a wide variety of printers for different purposes.

For example, you can find 3D printers from Anycubic that use resin, FDM 3D printers, and printers that use metal. Also, there are 3D printers that are aimed at beginners and more experienced users alike.

The diversity of their products is a good reason to check out the range of printers that Anycubic offers.

High-quality printing

As we mentioned above, even though Anycubic 3D printers tend to be at the cheaper end of the pricing scale, they offer high-quality printed models.

We’ve looked at many Anycubic printers in the past, and we are consistently impressed at how good they perform.

Not only do they offer superior prints, but the printers usually come with a variety of different features too. This can include WiFi connectivity, 4K LCD screens, a sturdy design, and a lot more.

So, Anycubic is undoubtedly one of our go-to brands when it comes to finding a high-quality 3D printer with a ton of great features added in.

8 Best Anycubic 3D Printers

1. Photo Mono X – Best overall Anycubic 3D printer

Photon Mono

The Photo Mono X is our top pick overall from the entire Anycubic range of 3D printers.

There are many things we love about this 3D printer, and the large build volume combined with the 4K LCD screen really sets it apart. In addition, the Photo Mono X offers very high-quality prints as it is a resin-based printer, and you’ll find the print speed fast too.

If you think you need to pay an outrageous price for this 3D printer, think again. The Photo Mono X is affordable, and while it isn’t the cheapest on our list, it provides great value for money.

A potential downside is that it isn’t the smallest 3D printer, so you will need some decent storage space to house it. The overall dimensions are 270mm x 290mm x 475mm.

Overall, this is a fantastic 3D printer that offers everything you need and more for a great price.

Pros

  • Brilliant resin-based 3D printer with a large build volume
  • 4K LCD screen is a very good feature
  • Available at a cost-effective price
  • Prints high-quality models

Cons

  • It is quite large, so you will need some room to store it

2. Mega S 3D – Best for easy assembly

Anycubic Mega

The Anycubic Mega S 3D is a great 3D printer to buy if you really hate spending hours getting it up and running. The assembly for this 3D printer is incredibly straightforward, and it only takes about 3 steps before you can start using it.

This isn’t the only advantage of using the Mega S 3D. It also features a Titan extruder, and it is one of the few FDM printers on our list. In addition, the bed has a patented microporous coating that improves adhesion, while the touchscreen is an excellent addition.

This printer is an upgrade to the Mega i3, with the power recovery loss and filament run-out detection being the two main differences between these 3D printers.

More experienced 3D printing enthusiasts probably won’t fancy paying extra money for the Mega S 3D over the i3, but if you don’t want a lot of assembly work, this printer is a good choice.

Pros

  • Very easy to assembly, and should only take minutes to setup
  • Has microporous coating which helps to improve adhesion
  • Power recovery loss and filament run-out detection
  • This printer is sturdy and well built

Cons

  • It isn’t a massive upgrade on the Mega i3

3. Photon – Best for a compact size

Photon

The Photon is ideal if you don’t have a ton of space. Unlike the Photo Mono X that does require a decent amount of room, the Photon’s dimensions are only 220mm x 200mm x 400mm, which means it is a proper desktop 3D printer.

Just because it is small in size doesn’t mean it is small in stature. This is a mighty 3D printer that provides high-quality models.

It lacks features such as WiFi, and the print speed is relatively slow at 20mm/h. However, this 3D printer is available for a very reasonable price. If you don’t need a big build volume to print off large objects, it is pretty hard to look past the Photon from Anycubic.

One last thing to note is that you usually can’t buy this 3D printer outside the USA.

Pros

  • Desktop 3D printer that doesn’t require much space
  • Available for a reasonable price
  • Can print of high-quality resin models and objects

Cons

  • Only available in the USA

4. Photon S – Best for beginners

Photon S

3D printing can be a pretty complicated affair especially if you a new to the game.

The Photon S is easy to use, and this is why it is our top pick for beginners. It prints off incredibly models, and it is ideal for creating miniatures.

Some other useful features of the Photon S include a decent print speed of 20mm/h, a dual rod on the Z-axis to create more precise objects, and easy-to-use plug-and-play software.

If you simply want to set up your 3D printer quickly and start experimenting, this is what we would recommend. It is very user friendly, has a lot of great features, and isn’t going to break the bank either.

For anyone that is wondering whether to opt for the Photon or the Photon S, read our comprehensive comparison guide.

Pros

  • Easy to set up and use, perfect for beginners
  • Creates accurate and precise models
  • Decent print speed

Cons

  • Has plastic casing rather than metal
  • This printer is more expensive than the Photon

5. Chiron – Best for build volume

Chiron

If you need a 3D printer with a large build volume, the Chiron is the one you should choose.

Build volume refers to the space you can print objects into, so the more significant space you have, the larger the print.

The Anycubic Chiron has a 400mm x 400mm x 450mm build volume, which is much bigger than any of the other 3D printers on our list. However, the Chiron has many features beyond its superior build volume. This includes an Ultrabase Probed, touchscreen, and easy to use UI, as well as its sturdy design.

The bed leveling system could do some work, and the fans are also quite noisy, which can be a hindrance depending on where you house this 3D printer.

Overall, if you require a big build volume and don’t want to spend too much money, the Chiron is a competent 3D printer.

Read our full in-depth review of the Anycubic Chiron to get a better idea about the capabilities of this 3D printer.

Pros

  • Huge build volume for printing large objects
  • Sturdy design with Ultrabase Pro bed
  • Easy to use and has a touchscreen

Cons

  • Fans are quite noisy
  • The bed levelling system could be improved

6. 4 Max Pro 2.0 – Best for printing with metal

4 max pro

3D printing with metal requires you to have a printer capable of using this type of material, which is why we have the 4 Max Pro on the list.

This is an upgrade to the original 4 Max Pro. It is relatively quiet when in operation as it uses TMC2208’s stepper drivers, while the fan has been improved too. You’ll also come across dual z-axis motors and a touchscreen.

The build area has been reduced from the previous versions (which was 270 x 205 x 205 mm), and this is a bit surprising, but it isn’t a massive reduction.

Aside from that, this is the best Anycubic printer if you want to print metal objects, and it works with various other filaments and materials.

Read our full 4Max Pro Review here.

Pros

  • Ideal for printing with metal and other materials
  • Very quiet when in use
  • It has a touch screen and some other great features

Cons

  • The build volume has been reduced from the previous version

7. Predator – Best for print speed

Predator

The Predator offers outstanding print speeds between 20~150mm/s, so if you do want a quicker print, this 3D printer from Anycubic is the one to go for.

This is an FDM 3D printer, and it does offer some other great features beyond fast speeds. The build volume is pretty good, and the flying extruder helps when working with flexible filaments. You’ll also find the automatic bed leveling system very useful, and this printer can use a range of filament types, including PLA, ABS, HIPS, PETG, Wood, and TPU.

The downside is that you can’t usually find this 3D printer outside of the EU, and the availability is a bit limited.

However, if you do manage to get your hands on one, the fast speeds are a real bonus for getting your models created quickly.

Pros

  • Very fast print speeds
  • Can be used with various filaments
  • An automatic bed leveling system

Cons

  • It is difficult to find this 3D printer outside the EU

8. Photon Zero – Best budget 3D printer

Photon Zero

The last Anycubic printer on our list is the Photon Zero which is the best printer on a very tight budget.

You can pick this 3D printer up very cheaply, but that doesn’t mean it has poor performance. It is a resin-based printer with a handy LCD screen, and it provides a decent print speed of 30mm/h for the price.

It is quite a compact 3D printer, but that can be a good thing as it doesn’t take up a lot of space.

The quality of the prints isn’t as high as other 3D printers (they can have a kind of fuzzy look about them), and the resolution is lower overall. The prints aren’t poor, but you can tell they haven’t been printed on a higher-end machine.

Pros

  • Very cheap and inexpensive 3D printer
  • Good range of features for the price
  • Decent print speed of 30mm/h

Cons

  • The prints aren’t as high quality as more expensive 3D printers

Frequently Asked Questions about Anycubic Printers

Question: Is Anycubic a good brand for 3D printers?

Answer: Yes. Anycubic is well-known for consistently creating superior and top-quality 3D printers for various uses. This includes FDM, resin, and metal 3D printers that come in varying levels of difficulty and pricing.

Question: Where are Anycubic based?

Answer: Anycubic is a Chinese company, and they are based in the city of Shenzen. They are relatively new, (founded in 2015), but you can buy their 3D printers worldwide.

Question: Can Can I use an Anycubic 3D Printer as a beginner?

Answer: Yes. While some 3d Printers from Anycubic can be challenging to get used to, they offer many models aimed at beginners. For example, the AnyCubic Photon S a very straightforward to set up and start printing.

Question: Are Anycubic 3D printers expensive?

Answer: Anycubic 3D printers are often some of the cheapest on the market, but that doesn’t mean they are poor-quality. Even though certain models are quite expensive, their products are relatively cost-effective.

Question: Can I use different slicing software with an Anycubic 3D Printer?

Answer: Anycubic 3D printers come with their own slicing software. However, there is wide range of different slicing software compatible with these 3D printers.

Question: Are Anycubic 3D printers FDM, or do they use resin?

Answer: Both – and more. You can find many Anycubic resin-based printers. In fact, Anycubic 3D printers that can also use metal and Anycubic 3D provides printers that can also use metal and other materials.

Which is the Best Anycubic 3D printer?

The eight 3D printers we have looked at from Anycubic all have their good points. For example, if you want to print with metal, the 4 Max Pro 2.0 is the best choice, while if build volume is important, then Predator would be more suitable.

However, we think that the Photo Mono X is the best Anycubic 3D printer overall.

We don’t really have anything bad to say about this 3D printer apart from the fact that it is pretty big, and you’ll need decent space to store it.

The Photo Mono X prints high-quality models, it has a good build volume, and the 4K LCD screen is an excellent addition. This resin printer does everything you need it to do, while you can pick one up relatively cheaply, so it isn’t even massively expensive.

Anycubic Wash and Cure Review: Is It Worth Buying in 2021

anycubic wash and cure review

One of the things that you always do when dealing with resin printing is to wash and cure your models after they are printed. Every expert and enthusiast will recommend both activities for post-processing. Thankfully, devices like the Anycubic Wash & Cure Machine 2.0 make post-processing a lot easier and faster.

There are currently two versions of the Wash & Cure Machine. The original is no longer available from the Anycubic online store except if you’re in the United Kingdom. They sell the original Anycubic Wash & Cure Machine for $99.

The Anycubic Wash & Cure Machine 2.0 sells for $50 more and is available from the manufacturer’s website.

Affordable and Efficient
Wash and Cure Station | AnyCubic

Don't waste your time with DIY garbage. This machine is inexpensive and makes post processing so much easier. Well worth any "premium" vs DIY.

Check Price Buy at Amazon.com
We earn a commission if you click this link and make a purchase at no additional cost to you.

Anycubic Wash & Cure Machine 2.0: Everything You Need to Know

The most significant draw of the Anycubic Wash & Cure Machine 2.0 is that you only need to use one machine to wash and then cure your 3D prints. That makes the whole process less complicated.

In fact, this machine will help you do all your post-processing work by pressing a few buttons. Everything runs automatically.

You can clean your prints and then harden them at the same time. Plus it has all the materials you need. The package includes:

  • Cure platform
  • Power cord
  • Reflector
  • Service card
  • Stainless steel bearing
  • Toolset
  • User manual
  • Washing basket
  • Washing container
  • Washing rack

Washing Your Prints

When you have just finished printing using a resin printer, it’s going to be slimy and sticky. The Anycubic Wash & Cure Machine 2.0 gives you an easy way to get rid of that sticky feeling.

The machine has a detachable washing container that you can fill with the cleaning solution. At the bottom of the wash container, you will find a small agitator or rotor, similar to the ones you find on a washing machine. Magnets power this agitator, and like a real washing machine for clothes, it spins forwards and in reverse.

There are two different methods in which you can wash your prints. First, you can use the washing rack that has a holder for your 3D printer’s platform. This method allows you to wash the 3D model without taking it off the platform first and is useful for smaller prints.

If your object is bigger than 4.5 inches (115 millimeters), you can take it out of the platform and put it into the washing rack.

In both scenarios, you will need to make sure that the entire print is submerged before you start washing.

Curing

After washing the model, you will need to take off all the supports before you cure it. The curing process will smoothen the surface further and harden the resin.

Just take the wash container out of the Anycubic Wash & Cure Machine 2.0 and replace it with the cure platform. The curing platform rotates, so the 3D model hardens from all sides evenly. You no longer have to place your 3D models out in the sun, which may result in uneven curing and warping of some parts.

The machine has a turntable and an array of lights that can cure your model in no time. Just place the 3D object on the cure platform and select how long you’d like it to cure. The general rule is that if your model has a diameter of 1.2 inches (30 millimeters), you only need to cure it for two minutes.

If your model is bigger than 30 millimeters, or if it has a very complicated shape and surface area, then opt for longer curing times.

Dimensions

You will need a big space on your desk or work table to make room for the Anycubic Wash & Cure Machine 2.0. It measures 8.9 by 9.3 by 14.4 inches (225 by 235 by 365 millimeters).

However, that size makes it possible for the machine to accommodate a wash container that measures 4.7 by 2.9 by 6.5 inches (120 by 74 by 165 millimeters). That volume means that you can wash most prints using this machine.

You can also cure 3D models as big as 5.5 inches (140 millimeters) in diameter and 6.5 inches (165 millimeters) tall.

The Anycubic Wash & Cure Machine can be hefty for some people. It weighs 8.2 pounds (3.7 kilograms).

The Bottom Line

If you have done some post-processing work for your resin-based 3D prints, then you’d know how easy it is to screw things up. You can get a model that’s been in alcohol for longer than it needs to be. The resin is unevenly hardened, or some parts of it might warp.

The Anycubic Wash & Cure Machine 2.0 makes everything easier. You just put the wash container or the cure platform, add your newly printed model, and press a few buttons, and that’s it. All you have to do is wait.

With this machine, your models are thoroughly washed and evenly cured.

Affordable and Efficient
Wash and Cure Station | AnyCubic

Don't waste your time with DIY garbage. This machine is inexpensive and makes post processing so much easier. Well worth any "premium" vs DIY.

Check Price Buy at Amazon.com
We earn a commission if you click this link and make a purchase at no additional cost to you.

Pros

  • The Anycubic Wash & Cure Machine 2.0 allows you to avoid leaving the print in an alcohol bath longer than necessary
  • No more dealing with alcohol fumes
  • Washing the 3D model takes away the slimy feeling
  • You can use alcohol, detergent solution, and other washing liquids that you have in the house

Cons

  • Spare parts for this machine might be difficult to come by

Comparing the Anycubic Wash & Cure Machine 2.0 and the Creality UW-01 Washing and Curing Machine

To make it easier to compare these two machines, check out this comparison table:

Brand Anycubic Wash & Cure Machine 2.0 Creality UW-01 Washing and Curing Machine
Pricing $149 $149
Two-in-one wash and cure Yes Yes
Dimensions (LWH, millimeters) 225 by 235 by 365 225 by 225 by 370
Weight (kilograms) 3.7 6.5
Touch screen controls Yes Yes
Washing    
Maximum dimensions of 3d model (millimeters) 120 by 74 by 165 170 by 120 by 160
Enclosed container Yes Yes
Curing    
Number of LED lights 12 18
Maximum dimensions of 3d model (millimeters) 140 by 140 by 165 165 by 165 by 200
Rotating curing platform Yes Yes
UV Top Cover Yes Yes

As you can see, the Anycubic Wash & Cure Machine 2.0 has the same price as the Creality UW-01 Washing and Curing Machine. However, the latter is better suited both for washing and curing larger 3D models. It also has more LED lights, which makes the curing process a lot faster.

Form Wash and Form Cure: Another Alternative

If you have a FormLabs 3D printer, you can opt to get the company’s own Form Wash and Form Cure machines. Unlike the Creality UW-01 and the Anycubic Wash & Cure 2.0, you won’t have a single machine to do both processes. Each one does washing and curing your models separately.

Form Wash

After printing, you can put the just finished models directly into the Form Wash. Or you can just rinse it without removing it from the build platform.

This way, you can get a consistent and thorough wash every time. It uses isopropyl alcohol to wash your prints. And if you’re busy, the Form Wash has a mechanism that will raise the wash basket when it’s done. That way, you do not have to fret about over-soaking your prints and warping them.

The Form Wash costs around $500.

Form Cure

The Form Cure helps you get stronger and more durable parts. What’s more, if you’re using FormLabs resins, you can set this machine to use settings that can cure it perfectly, using configurations that are specific to a particular material. This machine costs around $700.

Because you have two machines to work with, the Form Wash and Form Cure is ideal for those bigger jobs. You can cure a washed printed material and start a new batch on the Form Wash. This saves you the time you need to wait for the Anycubic or Creality two-in-one machines to finish both washing and curing your prints before you can start on another batch.

Pros

  • It saves you a lot of post-processing time

Cons

  • Very expensive to get both machines
  • Better suited for those who are using FormLabs 3D printers, specifically the Form 3, 3L, 3B, 3BL, and Form 2

The Benefits of Anycubic Wash & Cure Machine 2.0

As you can see, post-processing can be hazardous and tedious. That’s especially true if you’re printing several 3D models. The Anycubic Wash & Cure Machine 2.0 can help you do away with all the waiting and minimizes the amount of contact you have with the resin.

You can wash several pieces together instead of manually moving the printed models in alcohol. Post-processing work done on several pieces simultaneously will help you save time.

What’s more, using a machine like Anycubic’s will ensure more thorough washing and even curing.

FAQs

Question: Are there any alternatives to the Anycubic Wash & Cure Machine 2.0?

Answer: If you’re considering the Anycubic Wash & Cure Machine 2.0, you shuld look at similar products to see if it’s the best for your needs. Check out the Creality UW-01 Washing and Curing Machine.

Like the Anycubic Wash & Cure Machine 2.0, the Creality UW-01 washing and Curing Machine is a two-in-one machine. You can wash your 3D Prints and then cure them without the need for two devices taking up at least twice as much space on your desk.

The washing container measures 6.7 by 4.7 by 6.3 inches (170 by 120 by 160 millimeters), which is bigger than the Anycubic machine. This means that if you regularly print larger models, this might not be for you.

On the other hand, the Anycubic Wash & Cure Machine 2.0 will require you to store the cleaning solution in another container. You simply cannot leave the cleaning solution inside the wash container.

With the Creality UW-01, you can just leave the solution inside the washing machine container. It will not oxidize or evaporate because it is sealed.

This machine also uses magnets for its curing platform. Your 3D model rotates all the way around, ensuring even curing. There are double-row LED lights that handle the curing process.

You can dry or cure models that are as big as 8.9 by 8.9 by 14.5 inches (225 by 370 millimeters)

Pros

• You can leave the cleaning solution inside the washing container for storage
• Compared to the Anycubic Wash & Cure Machine 2.0, this has a larger washing container.
• Less expensive than Anycubic

Considerable Alternative
Creality 3D UW-01 Machine | Creality 3D Official

With three-gear speed mode, it includes washing and curing. The washing and curing time has 2-90min optional. Delicate models come from the curing and washing.

Check Price Buy at Amazon.com
We earn a commission if you click this link and make a purchase at no additional cost to you.
Question: Why do you need to wash and cure a resin printed object?

Answer: If you want a better looking and longer-lasting 3D Printed part, then you should spend time with post-processing work.

Post-processing will allow you to get better looking 3D Prints. All 3D Printed parts need some kind of post-production work and are an important finishing touch for your prints. It is in print processing that you remove the supports or any extra material. You should also wash and cure your models.

Washing takes care of the extra resins and gives your model less gloss and none of that sticky feel. Curing hardens your prints and makes them more durable.

Washing and curing will allow you to have the best print quality that your SLA printer can give you. If done right, it can improve both the aesthetics and the physical quality of your models.

Question: Can you do the washing and curing without buying a machine?

Answer: Start with washing your newly printed 3D model. You can use an ultrasonic bath, which uses a cleaning fluid that you can wash away the uncured resins off your models. You can also dunk the 3D object in a tub filled with isopropyl alcohol and then move it around

Dunking and rinsing your 3D objects in isopropyl alcohol may need at least two rinses because manually moving around the print will not be as thorough as putting it in a washing machine.

1. Taking the supports off

After washing, you can now proceed to clean your 3D Prints by taking off the supports and cleaning away any excess material. You can simply break them off using nothing but your hands.

However, if your model has intricate details, you will need to use flush cutters to make sure that you get the cleanest break possible.

2. Curing the Print

If you don’t want to buy any type of machine, you can go outside and put your models to cure under the heat of the sun. You will need to guard over your model, though, to ensure that it doesn’t warp and that the curing is even.

There are several options that let you avoid that hassle, however. You can buy a curing station from the same manufacturer who made your printer. Or you can use a nail polish curing lamp, which is more affordable than 3D printer curing lamps

3. Last Reminder: Be Safe

Always wear the right gear when handling resins. You will need safety glasses, a neat work area, and nitrile gloves.

If the resin gets in contact with your skin, wash it off right away. Plus, you should wipe any surface where resin gets spilled before it hardens.

Should You Buy the Anycubic Wash & Cure Machine 2.0?

If you want to save time and costs with your post-processing work, you should seriously consider getting the Anycubic Wash & Cure Machine 2.0. You get the best-printed parts without the hassles!

Affordable and Efficient
Wash and Cure Station | AnyCubic

Don't waste your time with DIY garbage. This machine is inexpensive and makes post processing so much easier. Well worth any "premium" vs DIY.

Check Price Buy at Amazon.com
We earn a commission if you click this link and make a purchase at no additional cost to you.

Anycubic Photon Mono Review: Is It Worth Buying

Anycubic Photon Mono Review

Stereolithography 3D printers are ideal for those people who want a high level of detail and accuracy to their prints. But they have always been a bit pricier than similar printers using fused deposition modeling. Fortunately, the entry of LCD-based SLA printers has made resin printing more accessible to more people.

The Anycubic Photon Mono is one of those printers that can satisfy even the most demanding 3D printer enthusiast. It uses a monochrome LCD to harden the resin, which means that it’s fast, accurate, and gives you high-resolution prints.

Should you buy the Anycubic Photon Mono? Here are the facts about the 3D printer that can help you decide whether or not to get this affordable and fast 3D printer.

Photon Mono 3D Printer | AnyCubic

With the transparent cover, you can watch your prints while still blocking 99.95% of the UV light.

Check Price Buy at Amazon.com
We earn a commission if you click this link and make a purchase at no additional cost to you.

Anycubic Photon Mono Resin 3D Printer: What You Need to Know

The Anycubic Photon Mono Resin 3D Printer is among a new line of printers that have made SLA printing more accessible even to the casual enthusiasts who’d like better details on their 3D prints. Reading the specifications, however, you’d instantly know that while print quality and speed are worth noting, there is really no groundbreaking features to expect here.

Features of the Anycubic Photon Mono

Six-inch 2k Monochrome LCD

This Anycubic Printer uses a high-resolution monochrome LCD. Monochrome LCDs are better than colored LCDs because these screens don’t have tints or filters.

These filters are what creates the red, green, or blue colors in regular colored LCDs. Without anything blocking the light, monochrome LCDs have a more intense light and are able to cure the resin a lot faster.

What’s more, monochrome LCDs use less electricity as well. So you not only save on time, but also on costs of printing. Monochrome screens are also more durable than colored LCDs. The LCD panel you see on the Photon Mono is a six-inch (152.4 millimeters) panel.

Easy to Replace FEP Film

The FEP is a transparent film that is placed between the ultraviolet screen and the build pate. It’s very useful to ensure that the light cures the resin properly. Over time, the FEP film will get deformed, perforated, or bent. When this happens, your prints have a higher chance of failing.

The Anycubic Photon Mono gives you an easy and quick way to replace the FEP film.

Simple and Functional Design

This printer is elegant and clean-looking, and it catches the eye with its transparent yellow blocking lid. All in all, it measures 9.0 by 8.7 by 15.1 inches (227 by 222 by 383 millimeters), which makes it ideal for the average work desk. That size allows the Photon Mono to have a build volume of 5.1 by 3.1 by 6.5 inches (130 by 80 by 165 millimeters).

You can get the lid off so the resin is fully accessible. Upfront, you gave the 2.8-inch (71 millimeters) touch screen display that allows you to operate the machine. A USB slot is found at the side of the 3D printer.

Anycubic Photon Workshop

When you use the Photon Mono printer, you should know that the company recommends its own slicer, the Anycubic Photon Workshop.

If this is your first Anycubic machine, then you should take the time to familiarize yourself with the program. The good news is that one can download the software free on both macOS and Windows, and it’s relatively easy to figure out.

If you don’t understand something, the manual is written in English, so you would probably have no problems with the instructions. What’s more, the slicer has a lot of nifty features, including being able to add supports automatically.

Print Quality

The Anycubic Photon Mono has a rated 51 microns of XY resolution, which translates to 2,560 by 1,620 pixels. If you are no idea or are not familiar with what those numbers mean, you should know that the prints come out highly detailed with excellent surface quality.

Plus, you don’t waste a lot of the resin with supports. The Anycubic Photon Mono requires very minimal support when you are printing complex models.

What You’d Like About the Anycubic Photon Mono

The Photon Mono does not have a massive build volume, but it’s a lot more spacious than other resin 3D printers at its price. You will also like how this printer can finish printing fast because of the monochrome LCD. You can expect curing times for this printer at around 1.5 seconds for every layer.

Moreover, the Anycubic Photon Mono delivers print resolutions of 2,560 by 1,620 pixels. That’s about 51 microns for the XY resolution. People who have tried or seen resin printing before will probably like how the Photon Mono does not smell that much when it’s printing. It’s also quieter than other similar printers.

Anycubic Photon Mono: What Can Be Better

The USB slot at the side is a bit inaccessible. If you use a USB drive for your designs, you will need to give the Photon Mono more space on the right side to insert it into the port. It would have made a lot of sense if the USB port was out front.

You may also have problems with the touch display used to operate the 3D printer. Because of its small size, it may be an issue with those who have bigger fingers to tap on the choices they want. The user interface will also take quite some time to get used to and there are more intuitive UIs out there.

The Bottom Line

The Anycubic Photon Mono was not made to impress us with groundbreaking features, huge build volumes, or being packed with functionality. But that does not really mean that you should just snob this 3D printer.

For its price, it has a good print resolution, a decent build volume, and fast printing speeds. But it’s nothing to write home about. If you are looking for a reliable 3D printer that can do the job, then the Anycubic Photon Mono is for you.

Photon Mono 3D Printer | AnyCubic

With the transparent cover, you can watch your prints while still blocking 99.95% of the UV light.

Check Price Buy at Amazon.com
We earn a commission if you click this link and make a purchase at no additional cost to you.

Pros

  • Excellent level of details and print quality
  • Very fast printing, especially when compared to other printers
  • The resin does not emit that bad odor that other SLA printers have

Cons

  • The touchscreen is small and has a limited viewing angle
  • The build volume can be restricting

Quick Specifications

  • LCD 3D printer for resin printing
  • No assembly required
  • Build volume (millimeters): 130 by 80 by 165
  • XY resolution (microns) : 510
  • XY resolution (pixels): 2,560 by 1,680
  • Z-axis positioning accuracy: 0.01 mm
  • Printing speed: 50 millimeters per hour
  • Compatible with third-party materials: Yes
  • Materials: 405 nm UV resin
  • Recommended Slicer: Anycubic Photon Workshop
  • Connectivity: USB
  • Dimensions (millimeters): 227 by 222 by 383
  • Weight: 4.5 kilograms

Other Anycubic Photon Versions

Aside from the Photon Mono X, Anycubic offers several other printers under the Photon line:

  • Photon S
  • Photon Mono SE
  • Photon Mono X

Photon S

The Photon S is an affordable resin printer that does not disappoint when it comes to print quality. It is also a sensical option for beginners because it is relatively straightforward to operate, and you can buy and try out 3D printing without having to shell out oodles of money.

This 3D printer uses a 2K LCD screen and delivers an XY resolution of 47 microns. It has a print volume of 4.5 by 2.6 by 6.5 (115 by 65 by 165 millimeters), which makes it ideal for small models.

Printing with the Photon S allows you to get more details on your prints.

Photon S 3D Printer | AnyCubic

Adopt matrix UV lighting and 2k high resolution screen, uniform distribution of energy, both contribute to enhance prototype precision.

Check Price Buy at Amazon.com
We earn a commission if you click this link and make a purchase at no additional cost to you.

Pros

  • The quality of the prints is more than what you’d expect for the price
  • No assembly is needed, and operation is easy
  • Excellent level of details for a budget printer

Cons

  • Quality control might be an issue
  • Flimsy build
  • Bed leveling might be a problem

Photon Mono SE

The Photon Mono, Mono SE, and Mono X were unveiled at the same time to celebrate Anycubic’s fifth anniversary. This budget 3D printer features a 2K monochrome LCD to harden the resin and an XY resolution of 51 microns.

Because the Mono SE has a monochrome LCD, it can print your models very fast: the LCD can quickly cure your resins in two to three seconds.

Photon Mono SE 3D Printer | AnyCubic

The exposure time is reduced to 1 second. The printing speed is 2-3 times faster than the speed of an RGB screen.

Check Price Buy at Amazon.com
We earn a commission if you click this link and make a purchase at no additional cost to you.

Pros

  • Fine details are possible with this printer
  • Speedy prints

Cons

  • Not exactly accurate

Photon Mono X

Two things set the Mono X from all other flavors of Photon Mono: a bigger build volume and the use of a 4K monochrome LCD. You can print objects measuring 7.6 by 4.7 by 9.6 inches (192 by 120 by 245 millimeters) with this printer.

Like Mono and Mono SE, the monochrome LCD gives rise to faster print speed.

Photon Mono X 3D Printer | AnyCubic

Cooling device for stable printing performance and longer service life.

Check Price Buy at Amazon.com
We earn a commission if you click this link and make a purchase at no additional cost to you.

Pros

  • Huge build volume
  • 4K monochrome LCD
  • Fast very detailed prints

Cons

  • It might be too hefty for your desk

Which Anycubic Photon Product Is Right for You?

If you like the affordable price of Anycubic’s Photon line, here is what you should know.

The Photon S uses a colored LCD, which helps bring the price down. Meanwhile, as the name implies, the three Photon Mono variants use a monochrome LCD to cure the resin. As such, they can print a lot faster than the Photon S.

How much faster? The Photon Sprints at a maximum of 0.8 inches per hour (20 millimeters per hour). That’s less than half the 2.0 inches per hour (50 millimeters per hour) print speed provided by the Photon Mono.

Meanwhile, the Photon Mono X has a print speed of 2.4 inches per hour (60 millimeters per hour), while the speediest of them is the SE, which prints at 3.1 inches per hour (80 millimeters per hour).

If you are looking for the Photon model with the biggest build volume, then get the Photon Mono X. You can print 3D models measuring 7.6 by 4.7 by 9.6 inches (192 by 120 by 245 millimeters).

Side-by-Side Comparison of Currently Available Photon Mono Products

To make it easier for you to really compare the four Photon models that are available right now, check out this table.

System Photon Mono SE Photon S Photon Mono X Photon Mono
Price $380 to $420 $250 to $420 $690 to $760 $220 to $270
Dimensions (millimeters) 220 by 200 by 400 230 by 200 by 400 270 by 290 by 475 227 by 222 by 383
Weight (kilograms) 8.2 9.5 10.8 4.5
Resin Yes Yes Yes Yes
405-Nanometer Light Source Yes Yes Yes Yes
LCD-Based SLA Yes Yes Yes Yes
Rated Power 55W 50W​ 120W 45W
Build Volume (millimeters) 130 by 78 by 160 115 by 65 by 165 192 by 120 by 245 130 by 80 by 165
Layer Resolution (microns) 10 to 150 25 to 100 10 to 150 10 to 150
Top Printing Speed (millimeters per hour) 80 20 60 50
Touch Screen (inches) 3.5 2.8 3.5 3.5
USB Connectivity Yes Yes Yes Yes
XY Resolution (microns) 51 47 50 51
XY Resolution (pixels 2,560 by 1,620 2,560 by 1,440 3,840 by 2,400 3,840 by 2,400
Z-Axis Resolution (microns) 10 1.25 10 10
Fused Deposition Modeling Stereolithography
Excellent Print Resolution No Yes
Highly Accurate Yes Yes
Good Surface Finish No Yes
Easy to Use Yes Yes
Main Selling Point Fast and affordable Very accurate with smooth surface finish
Cons Prints have lower accuracy and level of details Resins should be kept out of UV light
Materials Thermoplastics Resins

SLA: Lasers vs Projectors vs LCD

If an SLA printer is a better choice for you, you will need to narrow it down further to the type of light source used to harden the resin.

Lasers in 3D printers have been around the longest. These devices use a laser, and the resin cures where the light hits them. When an entire layer is cured, the build platform rises, and the next layer is printed.

Meanwhile, in digital light processing printers, projectors are used to harden the resin. Conversely, LCD panels are used in LCD-based 3D printers.

Which resin curing printer is the best? It depends on what you are after.

Cost

Laser and DLP printers are often more expensive than LCD. The reason for this is because LCDs are readily available as they are used in other devices such as smartphones, TVs, and tablets.

Build Area

DLP printers often have a smaller build area because one component, the digital micromirror device, typically has resolutions of 1,920 by 1,080 pixels. You can find DLP printers with build volumes larger than that, but these often have print quality problems.

Printing Speed

Because of the way they work, laser 3D printers are often slow compared to both LCD and DLP printers, which can expose and harden an entire layer. Between colored LCDs and projectors, DLP printers used to have an edge when it comes to fast printing times. That is no longer true with the introduction of monochrome LCD printers.

Alternatives to the Anycubic Photon Mono

When we said that there’s a lot of choices when it comes to LCD printers and resin printers, we weren’t kidding. If you are not sold on Anycubic’s products, here are the top options that you have.

Elegoo Saturn

Elegoo Saturn is perfect if you need a 3D printer with a larger build volume. The Saturn gives you the chance to print objects as large as 7.6 by 4.7 by 7.9 inches (192 by 120 by 200 millimeters).

This printer sells for more than double the price of the Photon Mono, but it does come with a 4K monochrome LCD. It delivers print resolutions of 3,840 by 2,400 pixels.

It also has cooling fans that help keep the temperatures down and prolonging the life of the LCD screen. You can also enjoy the Ethernet connectivity, which allows you to print remotely.

ELEGOO Saturn MSLA 3D Printer | Amazon

Saturn 3D Printer comes with 8.9-inch 4K monochrome LCD screen with 3840 x 2400 HD resolution, reducing layer printing time to 1.5s-2s, which is a 60% faster than Mars Pro but still delivers excellent print results.

Buy at Amazon.com Learn More
We earn a commission if you click this link and make a purchase at no additional cost to you.

Pros

  • Bigger build volume means that you can now print bigger models
  • Ready to print even if you’ve just taken it right out of the box
  • Compatible with third-party resins
  • Excellent print quality

Cons

  • More expensive than the Photon Mono

Quick Specs

  • Light Source: 8.9-inch (226.1 millimeters) 4K mono-LCD
  • Build Volume: 7.6 by 4.7 by 7.9 inches (192 by 120 by 200 millimeters)
  • XY Resolutions: 50 microns
  • Z Resolutions: 10 microns
  • Pricing: Around $500

Phrozen Sonic Mini

If you are searching for a 3D printer that is more affordable than the Photon Mono, you should consider the Phrozen Sonic Mini. This 3D printer is one of the first to enter the market with a monochrome LCD.

There are some trade-offs for its lower price, such as having a 1,920 by 1,080 pixels LCD panel and you are working with an older printer, but print quality is excellent, and printing times are very short.

Phrozen Sonic Mini | 3D Printers Online Store

This is a really great budget resin printer and it prints insanely fast. You could print almost anything!

Check Price Buy at Amazon.com
We earn a commission if you click this link and make a purchase at no additional cost to you.

Pros

  • Fast printing times
  • Affordable
  • Very easy to use

Cons

  • Build volume is smaller than that of the Photon Mono
  • A full HD LCD panel is not 2K

Quick Specs

  • Light source: 5.5-inch (140 millimeters) full high definition monochrome LCD
  • Build volume: 4.7 by 2.7 by 5.1 inches (120 by 68 by 130 millimeters)
  • XY resolution: 62 microns
  • Z resolution: 10 microns
  • Price: Around $200

Creality LD-002H

Another entry in the budget LCD printer space, the Creality LD-002H, also boasts a 2K monochrome LCD. This 3D printer has roughly the same build volume and print resolution and as the Photon Mono.

The Creality LD-002H includes an air filtration system that uses activated carbon, which helps some of the smell produced by the machine.

LD-002H 3D Printer | Creality 3D Official

The Creality LD-002H resin printer is supported by CHITU BOX software for slicing. CHITU BOX is easy to use, with one-key functions to add a model, adjust supports, model size, etc.

Check Price Buy at Amazon.com
We earn a commission if you click this link and make a purchase at no additional cost to you.

Pros

  • Very similar to the Photon Mono in print quality, print size, build volume, and even printing speed

Cons

  • Bed leveling is done manually

Quick Specs

  • Light Source: 6.08-inch (154.4 millimeters) 2K mono-LCD
  • Build Volume: 5.1 by 3.2 by 6.3 inches (130 by 82 by 160 millimeters)
  • XY Resolution: 51 microns
  • Z Resolution: 30 microns
  • Market Price: Around $240

FAQs

Question: Is Anycubic a good company?

Answer: Anycubic is a Chinese company that is known for its affordable yet very capable printers. If you are looking for a 3D printer that does not break the bank, yet delivers outstanding print quality, a high level of detail, and fast printing times, then you should give their printers a try.

What’s more, the company has been innovating with its 3D printers. You will find that they have all the latest technologies that are used for 3D printers, and they also have their proprietary technologies.

Question: What is resin printing?

Answer: When it comes to 3D printing, the first thing that most people encounter is fused deposition modeling printers. These are printers where filaments are pushed out of the print heads to make a layer. Resin 3D printing, or stereolithography, uses resin instead of filaments. The resin is hardened layer by layer to create your models.

There are different types of light sources that are used for resin printing, including laser, projectors, and LCD. The Anycubic Photon Mono uses an LCD to harden the resin and create your models.

Question: Are LCD 3D printers better than other types of printers?

Answer: As mentioned above, there are two popular technologies used in 3D printing, FDM and resin curing, and each one brings with it its own set of benefits and downsides.

Both SLA and FDM printers are easy to use. Still, with all things equal, an FDM printer will pale compared to an SLA printer when it comes to print accuracy and resolution, surface finish, and the ability to create intricate designs.

As such, SLA printers deliver better models but are more expensive than FDM printers. SLA 3D printers are more ideal for functional prototypes, dental uses, and molds. It’s also better to use an SLA printer if you are making models, patterns, and jewelry. FDM printers, on the other hand, allows you to create affordable prototypes and proof-of-concept models.

Another advantage when using FDM printers is that you can be very creative because it allows you to use a wide range of materials in an assortment of colors.

Should You Buy the Anycubic Photon Mono?

The Anycubic Photon Mono enters the market at a time when there are a lot of monochrome LCD printers. The Photon Mono does not really have any groundbreaking features. In fact, it has middle of the road functionalities that you can find in other similar printers.

But that is not to say that you shouldn’t buy the Photon Mono. It works fast, and it has excellent print quality. You can get 3D models that look good because of the Photon Mono’s high resolutions and level of detail.

Photon Mono 3D Printer | AnyCubic

With the transparent cover, you can watch your prints while still blocking 99.95% of the UV light.

Check Price Buy at Amazon.com
We earn a commission if you click this link and make a purchase at no additional cost to you.

Before deciding, however, there are some options for you to consider. For instance, three printers from the same company use LCD to create your 3D objects, and two of them are worthy alternatives to the Photon Mono. If you like a bigger build volume, you should certainly buy the Anycubic Photon Mono X.

Speaking of which, you can buy the Elegoo Saturn and also get a 3D printer that has a bigger build quality. However, if you are looking to save money, the Phrozen Sonic Mini is worth a look. It has comparable components and technologies with the Photon Mono, but with a more wallet-friendly price tag.

Anycubic Mega X Review [2021]: Should You Go For It?

Imagine you’re rolling through the McDonald’s drive-thru and you order a Big Mac, fries, and a Coke. Classic order. Good on you. Now, you ask them to supersize it. Because you simply can’t get enough of the greasy goodness.

Apply this logic to the Anycubic Mega S. That’s what Anycubic did when they made the Mega X. It’s like a supersized Mega S, with all the same great features in a bigger package. It’s a mid-sized FDM printer that’s definitely worth your money.

Are you looking for a great 3D printer that rings up at less than $500 and meets, or even surpasses your expectations? Then you may have come to the right place.

Mega X 3D Printer | AnyCubic

No assembly hassle, get started quickly. Provides better printing experience, compatible with TPU.

Check Price Buy at Amazon.com
We earn a commission if you click this link and make a purchase at no additional cost to you.

Specifications

  • Technology: FDM
  • Weight: 14kg
  • Printer dimensions: 500mm x 500mm x 553mm
  • Arrangement: Cartesian XZ head
  • Build volume: 300mm x 300mm x 305mm
  • Feeder system: Bowden drive
  • Extruder type: Single
  • Maximum extruder temperature: 250°C
  • Nozzle size: 0.4mm
  • Layer resolution: 0.05-0.3mm
  • Print chamber: Open
  • Print Bed: Heated bed with Anycubic Ultrabase
  • Bed leveling: Manual
  • Maximum heated bed temperature: 90°C
  • Frame: Metal
  • Display: Color touchscreen
  • Connectivity: USB, SD card
  • Wi-Fi: No
  • Built-in camera: No
  • Filament sensor: Yes
  • Filament diameter: 1.75mm
  • Materials: PLA, ABS, HIPS, wood
  • Third party filaments: Yes
  • Slicer: Cura
  • Operating systems: Windows, Mac, Linux

Setup

The Anycubic Mega X only comes semi assembled, but putting it together is pretty simple. It’s packed neatly in the box and the instructions identify exactly what everything is and how to attach it. You can view the instructions via a paper manual or the USB stick provided.

Anycubic provides clippers and a spatula, as usual, but the Mega X also ships with a 1kg spool of PLA. Spare parts include PTFE tubing and a hot end.

Assembly mostly includes mounting the gantry on the base with a few screws. Connect some cables together, set the MeanWell PSU switch to the correct voltage, and you’re done in minutes.

Before printing, you’ll have to level the bed manually. The printer has large adjustment knobs that make this task rather trivial. You can auto-home the print head and adjust the knobs as needed, leveling with just a sheet of paper.

Some budget 3D printers use tiny knobs to achieve the task of leveling, making it really difficult, so in comparison, the Anycubic Mega X makes it boring, but easy. There’s no need to endure the torture of small, hard to reach knobs anymore.

Features

Anycubic gained some market traction at the low end with their i3 Mega and then followed it with an improved version in the Mega S. After gaining user trust, they kept the same design and ease of use they knew worked but improved the scale with the Mega X.

Compact, smart design

The base unit of Mega X includes the mainboard, power supply, and touchscreen. The cable management is neat, which is a welcome change compared to a lot of other budget units that come with wads of cables all jumbled together.

The metal frame offers a robust, sturdy chassis. The Z-axis features led screws and the Y-axis carriage runs along dual rails, supporting the bed, and making the entire structure even more steady.

This printer has a solid foundation that offers consistent printing. Not only is this rarely found in the budget price point, but the Mega X also features dual Z-axis end stops. It can combat unevenness you may find in the X-axis and relevels the X-axis every time it returns home.

It has mechanical end stops on the X-axis, but it uses a contactless sensor for the Y-axis end stop. This offers a more premium design that maintains a look and feel far above its price point.

Anycubic Ultrabase

The Anycubic Ultrabase has set the precedent for many bases to imitate. It’s a 300mm x 300mm bed sitting on top of four screws for manual leveling. While it’s roomy, it’s also innovative. This glass bed is coated with a porous material that offers excellent adhesion while making it easier than ever to remove your jobs when they’re complete. It’s especially unique when printing with PLA.

It can heat to 60°C in two minutes with a maximum temperature of 90°C. It also does a fantastic job of distributing this heat across the entire surface, enabling effective adhesion for quality prints without huge flaws.

This is exceptional for large print surfaces, especially when it comes to preventing warping. It can still be a problem when printing with ABS, but it’s to be expected when the temperature maxes out at only 90°C.

Single extruder

This single Titan extruder has a hot end capable of a maximum of 250°C. It uses PTFE tubing to help filament navigate its way to the melt zone. It’s nearly impossible to print hotter than this without getting off-gas of the PTFE, which can be toxic.

This is more than hot enough for consumer materials, so it’s a fantastic feature in a budget 3D printer. You should have no problem using Mega X at around 245°C with PETG, which is a high temperature material.

The downside to Anycubic filament holders is that they stick out sideways on the bottom. While it takes some of the weight off of the frame, it means the filament gets fed upside down.

This, combined with the filament runout sensor, which is mounted on the side of the gantry, means the filament is constantly strained. However, thanks to a feeding mechanism that works well, you’ll get continuous feeding.

It just takes some working with to change the filament, because it’s inserted upside down. Thanks to the plastic funnel that Anycubic provides, you can easily guide your filaments into the gear mechanism.

Rigid filaments are much easier to insert than flexible ones, as you might expect.

Connectivity

One of the most important things about 3D printing is your ability to oversee the print process, even when you’re not actively designing your print. With a 3.5-inch color touchscreen (something you more frequently see on higher end 3D printers), you have all of the options you need.

The menu can be somewhat confusing, but the software has everything you need to set up the printer just the way you want it. You can load your prints via a USB cable or an SD card.

Unfortunately, aside from what’s already been mentioned, there’s nothing new over the Mega S. Given that there’s a few years difference in release date, many users are disappointed by the lack of updates here when it comes to Wi-Fi, quieter printing, or auto bed leveling.

Performance

If you’ve had any experience with the Mega line before, you know that they produce great results for the price you pay. You’ll see this theory confirmed in Mega X, too.

Just like any other budget 3D printer, you’ll likely have to make some adjustments to get your Mega X to function properly. However, that’s not uncommon.

Thanks to the Anycubic Ultrabase, your prints will adhere well and easily pop off when they’re done. This adds to your overall experience by making it more seamless throughout. The best thing about it is you don’t have to use glue, which makes it a messy and less than a desirable affair.

It leaves your print surface looking like it did when you took it out of the box, but it also gives your print projects smooth first layers for an aesthetically pleasing result every time.

Mega X can handle many different materials, but it’s all based on your technical settings. While some flexible filaments will come out flawlessly, others will tangle up in the gear mechanism helplessly.

You’ll have to adjust the print and feed speed accordingly to get to a manageable flow without any backing up or coiling. It can be a bit of trial and error, which is excruciating at times, but once you get there, it handles almost anything like a champ.

Unfortunately, you may never find a way around the warping of ABS. No matter how much you change the temperature or fan settings, the Mega X just isn’t suited for something as finicky as this temperature sensitive material.

The upside is that it still handles PETG and PLA well, so you’re not limited in your choice of materials.

Mega X 3D Printer | AnyCubic

No assembly hassle, get started quickly. Provides better printing experience, compatible with TPU.

Check Price Buy at Amazon.com
We earn a commission if you click this link and make a purchase at no additional cost to you.

Usability

Mega X allows you to use any open source slicer. While Cura remains one of the most popular options, you can use anything you’re comfortable with, which opens up the usability of the machine quite nicely, although Anycubic recommends Cura.

While the UI can be confusing, the menu items are large and easy to read. You may find at times that the submenus are unclear and contain tools that don’t seem to belong. The button press sound can also be quite obnoxious.

And while the Mega X is a sturdy machine, it’s also a noisy one. The Z-axis screws are the most deafening, but they only move when homing at the beginning of the print. The other aspects of the printer aren’t particularly quiet, either, from the drivers to the cooling fans.

The filament runout sensor works well, and once reloaded, the print job will pick up where it left off without any problems. The downside here is that it’s a mechanical sensor that will only trip with a lack of filament, rather than a costly optical sensor that will trigger with a filament blockage.

The print resume function works less than ideally. Sometimes it resumes the print after a power outage, and sometimes it doesn’t, leaving you to start your job over from scratch.

Alternatives

If you’re seriously considering a budget 3D printer like the Anycubic Mega X, you may also want to take a look at the following options before making a buying decision.

Anycubic Mega S

This previous iteration sports the same sturdy build and nearly identical features. The build volume is about two-thirds the size, at 210mm x 210mm x 205mm, an 3d it’s quite a bit cheaper, too.

It’s a great option if you don’t mind the smaller print volume but you want all of the same features. You really won’t miss a thing and your wallet will be a little fatter from the cash you saved.

i3 Mega S | AnyCubic

One-piece hanging design, simple and beautiful. The feeding of filament is smoother and the storage of filament is more convenient.

Check Price Buy at Amazon.com
We earn a commission if you click this link and make a purchase at no additional cost to you.

Artillery Sidewinder X1

The Sidewinder X1 was Artillery’s first attempt at a 3D printer. It’s another budget solution with a sleek look, but it has a bigger build volume of 300mm x 300mm x 400mm. It also has a direct drive system.

While the print quality out of the box isn’t quite as good as the Mega X, it can be really great for a budget solution if you spend some time getting the settings just right. Plus, with the exceptional print volume, you really won’t find much else in this price range that offers quite as much.

Artillery Sidewinder X1 3D Printer Kit | 3D Printer Online Store

Artillery Sidewinder X1 is a all-in-one cartesian 3D printer with ultra quiet stepper drivers, direct drive extruder, dual Z axis, AC heated bed, TFT touch screen.

Check Price Buy at Amazon.com
We earn a commission if you click this link and make a purchase at no additional cost to you.

Original Prusa i3 MK3S

This printer is slightly more expensive but still rings up at under $1000. However, it has almost everything you’d ever want right out of the box. It heats up quickly, has a flexible metal build plate, and features a direct drive system.

The excellent print quality leaves little to be desired, and the automatic bed leveling makes setup a breeze. You’ll get a really great value out of this printer, so while it may not be a budget solution per se, it might just be the best option on the list.

Original Prusa i3 3D Printer Kit | Amazon

This provides a great print setup with the printer so you don't have to dive into complex new programs by the time construction is done. You can start printing right away! Of course, you can dive into the repaired.

Buy at Amazon.com Learn More
We earn a commission if you click this link and make a purchase at no additional cost to you.

FAQs

Is owning a 3D printer worth it?

It’s really cool learning how to print in 3D, but not everyone may find it valuable. You can spend a lot of time and money on it and it may not end up being worth it for you, resulting in a huge strain on your budget.
Thankfully, budget 3D printers offer a great entry point into the world of 3D printing, so you can get your feet wet before spending too much money. Any of the 3D printers here are great budget options for you if you’ve never done it before.

Can you make money using a 3D printer?

Sometimes you can sell items you make with your 3D printer and you can even use your at-home 3D printer as a commercial services on websites like Hubs. Just list it as a service or take orders for prints.
Just remember that poor quality items and printers won’t make as much money, so it’s probably not a good idea to do it with a budget printer. However, if you upgrade to a more professional device, this may be an option.

What are the disadvantages of 3D printing?

3D printing is fun, but there are always disadvantages. In the world of budget 3D printing, one of the main disadvantages is a lack of features. You’re not going to find the build volume or the range of materials that you would find in a more expensive, professional quality printer.
You’re also not going to get the same high quality results. Design inaccuracies will leave you with imperfect prints, and if you’re not careful, you can struggle with copyright issues.

Is it cheaper to build a 3D printer?

If you’re looking at building a quality 3D printer made out of high performance parts, it’s generally cheaper to buy the parts individually and build it yourself. However, if you’re entering the 3D printing world at the budget level, you’re better off spending a few hundred bucks on a budget printer.

You have to keep in mind that building a 3D printer isn’t easy. You have to get the right components and know what you’re doing, or the printer won’t work. It’s a big time commitment, and if you’re going to but a cheap 3D printer, it’s well worth spending the money to save yourself the time.

The Verdict

The Mega X is a great, large volume budget 3D printer. The Anycubic Ultrabase gives you a seamless experience all around while the print quality may just exceed your expectations.

It has a sleek appearance with a sturdy build. Despite the price, they chose not to include any cheap parts. Plus, with steel construction, once you set up the printer, there’s no need to go back and readjust it later.

The large touchscreen makes it easy to use and the ability to use your own choice of open source software open up its usability to anyone who has their own personal preferences.

It doesn’t differ much in terms of features from the Mega S and it would have been nice to see some improvements like auto bed leveling and Wi-Fi connectivity, but for those who like the Mega series and want the extra build volume, it’s a great option.

Mega X 3D Printer | AnyCubic

No assembly hassle, get started quickly. Provides better printing experience, compatible with TPU.

Check Price Buy at Amazon.com
We earn a commission if you click this link and make a purchase at no additional cost to you.

 

Epax X1 vs Anycubic Photon Compared: Which One Is Right For You?

3D Resin printers are an investment you’d want to get right. Therefore, today we’ll be looking at the Epax X1 vs Anycubic Photon and comparing all the details you need to know to make an informed decision.

There are plenty of affordable 3D printers available on the market, but a printer’s features determine its utility to you. Can it deliver the results you need? How long-lasting is it? Is it cost-efficient in the long run?

After all, the main selling point of a resin printer includes its accuracy, intricacy, and its smooth finish. Unlike other Fused Deposition Modeling printers, resin 3d printers are also considerably inexpensive options. However, they are still an investment, and making the right call can save you money.

Moreover, no one printer can be right for everyone. Given the difference in construction and outcomes, each 3D printer serves a purpose.

It is, therefore, important to look at their purpose and whether that aligns with your work style. If you’re a beginner, you’ll have different requirements, such as ease of use. Intermediate or expert users will, instead, want to focus on high-quality finish or efficiency.

Our comparison outlines all the specifications of Epax X1 and Anycubic Photon printers while keeping the above-mentioned questions in mind.

Main Differences Between Epax X1 vs Anycubic Photon

The main differences between Epax X1 vs Anycubic Photon are:

  • Anycubic Photon uses an FEP Film for resin vat, whereas the Epax X1 uses non-FEP film while compatibility for FEP films.
  • Epax X1 consists of dual steel rods to provide greater stability, whereas the Anycubic Photon uses a single rod
  • Anycubic Photon is more affordable, whereas Epax X1 has a relatively higher price tag
  • Epax X1 uses 50 high energy LEDs as its main light source, whereas the Anycubic Photon uses UV integrated light

Their distinctions don’t stop there, however. To understand each product’s full capabilities, offerings, and differences, let’s take a deep dive into their characteristics.

Exploring Epax X1 and Anycubic Photon features

On a surface level, both printers will seem to operate in a similar way; but their construction and approach differs. As we explore different components of each, keep your projects and goals in mind to figure out which would suit your needs better.

Design & Construction

Closed frame resin printers typically have a similar layout.

Epax X1

Epax X1

The printers are encased in a box fitted with plexiglass. This protects the resin from contaminants and temperature fluctuations. If resin is exposed to external UV rays from outside environments, it may harden quicker or disrupt the printing process. The setup also reduces noise while making printing safer by containing fumes.

Both Epax X1 and Anycubic Photon have a metal housing which provides a durable build. However, while the Photon has plexiglass fitted in each side, the X1 only uses it on its front.

While this allows Anycubic users to view their designs while printing from multiple angles, there is a cost. The plexiglass is a good solution, but it ultimately does let light in. Therefore, it does not disrupt the printing process, but leaving the resin in the printer could harden it on the vat. The Epax reduces risk by only having one viewing window, but it compromises on visibility.

The build volume of the device determines the dimensions of the prototypes or models you can make. Both Photon and X1 printers have the same build volume, i.e. 115 x 65 x 155; therefore either option could work interchangeably in this aspect.

Anycubic Photon

Anycubic Photon

In terms of light source, companies use different approaches. Anycubic Photon uses a UV light to help harden the models and build it layer by layer. Whereas the Epax X1 is equipped with 50 high energy LED light bulbs. The latter provides an even distribution of light which consequently, impacts its finish and quality.

Lastly, the construction of the printer inside differs as well. The Epax X1 has a dual Z-axis rod which is sturdy and provides stability during the printing process. The original Anycubic Photon has a single rod that is known for its wobble that may impact your design.

Notably, however, the Anycubic Photon S does have a dual rod; but it is priced higher with a few other notable shortcomings.

Printing

Moving on to the printing itself, different types of printers have their own methods to produce 3D objects. With resin printers, models are built layer by layer. The process is often slow and will need to be isolated from delivering the best results. Any shakes or outside interference can damage results, especially since many use resin printers to produce intricate designs.

A platform attached to a Z-axis rod level up and down in a pool of resin while being exposed to a light source to produce each layer. Therefore there are a few elements you want to keep in mind here.

The Anycubic Photon has an excellent print quality which lends to its popularity among resin printer users. But, it does notably wobble, as mentioned earlier, due to its single rod construction. This may cause streaks in the design. Moreover, the build plate for the Photon requires manual leveling and sanding to unlock its proper potential.

On the other hand, Epax X1 does not require any adjustments, and its flatbed plate is fully calibrated right out of the box. Add in its dual rod system and it overall produces slightly better results than the Anycubic Photon.

Epax X1 has a definite advantage when it comes to print quality and ease of use. But, there are a few other factors that might matter to you.

Software

ChiTuBox Software

Slicing software of the two companies falls on opposite ends. Anycubic uses its proprietary software, whereas Epax utilizes existing third-party software.

This roughly translates to Anycubic being able to provide support and are directly responsible for their software. Whereas, third-party software is often more flexible and robust.

Anycubic’s slicing software is relatively simple to use and made for all levels of users. There are only 4 settings and provides quick and easy set up.

Epax X1 comes with the popular ChiTuBox software which is an overall more advanced program. With some added features, it enhances the user experience to provide a more flexible working environment. Additionally, it also gets points for improving accuracy.

Alternatively, though, the Anycubic devices can make use of software other than its proprietary software. But, users will have to go through a rather lengthy process to set up.

Your choice may come down to a matter of use and preference. For example, beginners may use simpler, straight-forward software to work with.

This is where Anycubic Slicing software would be a good option. Alternatively, the Epax X1 would be a solid option as a 3D printer for dental work given its smoothness and precision.

Post-Processing

Once your model has been built by the 3D resin printer, it needs to go through post-processing. This process is meant to help the model harden in a uniform way without messing its finish. We know that UV rays cure resin, but the sun’s rays have multiple rays that end up burning or provide uneven curing.

Post-Processing

Therefore, following the proper protocol is important to achieve high quality results.

Luckily, post-processing follows similar steps regardless of which resin printer you have. You will need to dip the model in an alcohol bath before it can be cured. Using an ultrasonic cleaner with 91% alcohol is preferred.

Moreover, the internal resin pool will need to be cleaned within the device to prevent it from hardening.

The Anycubic Photon uses an FEP film which is a transparent, double-layered foil. This layer is chemical resistant and may get damaged from alcohol. Therefore it is important to wash with warm water and dish-wash soap.

That said, Epax X1 uses non-FEP film which is largely more resistant, stable and lasts longer. Hence why it is preferred by many. Not to mention, FEP films will need to be frequently replaced which adds to their overall usage cost.

Specifications for Epax X1 and Anycubic Photon

Epax X1  Anycubic Photon 
Build Volume: 116 x 65 x 165 mm Build Volume: 116 x 65 x 165 mm
Software: ChiTu Software Software: Anycubic Slicing Software
Connectivity: USB, Ethernet Connectivity: USB, Ethernet
Layer Resolution: 47 microns Layer Resolution: 25-100 microns
Anti-aliasing: Yes Anti-aliasing: Yes
Z-axis: Dual rod Z-axis: Single rod

Comparing Epax X1 vs Anycubic Photon – Pricing

Pricing is where a huge chunk of the difference lies between the Epax X1 and the Anycubic Photon. Resin printers are comparatively affordable options as 3D printers, but they still require an investment.

Both companies focus on providing affordable, high quality printers that will last you a while. They have shown their utility by their popularity among users.

However, Anycubic Photon is the company’s older model with the Photon S being its latest iteration. As such, the Photon has a more affordable price tag that will make it an ideal option for some.

There are more considerations, however. The initial price tag may be cheaper, but think about its long term use and cost to you. The Photon comes with gloves and mask, resin vat, toolkit, USB stick, screws, door handle, adapter, scrapper, and a manual. Resin can be purchased with the printer to save time.

Epax X1 has a higher price but is a more stable printer with lesser replacements required. It’s package consists of a USB stick, ChiTuBox software, 2 resin filters, a non-FEP film replacement, an adapter, and a manual. However, no resin can be purchased with the printer.

You may also want to consider other accessories, such as a model bath, a wash and cure box, extra FEP film, Micron paint strainers, and alcohol or other cleaning supplies.

Anycubic Photon vs Epax X1

Epax X1 vs Anycubic Photon – Ease of use

Ease of use is rather subjective. Some users could find Anycubic easier to use while others will have a preference for the Epax.

However, using each product’s features and their characteristics, we can determine which is more accessible for different users.

The Epax X1 comes prepared with everything you need to get started (although the resin has to be purchased separately). It provides versatility and flexibility with its use of third party software.

The ChiTuBox is excellent software to start creating resin designs, but there is a learning curve to use. Its settings may need configurations to achieve the results you need. That said, ChiTuBox is a popular slicing software with a community of users and customer service ready to help you out. Nevertheless, its advanced settings should be considered.

Additionally, the Epax X1 also uses a USB connection as well as Ethernet to transfer and build design. The USB option will be quicker overall, but depending on your usage, there is the ethernet option available to you.

Lastly, the X1 comes with its manual to help you get started whether you’re a beginner to Epax or 3D printing in general.

The Anycubic Photon is user-friendly as well, however, users report having to make some changes to the build plate or z-axis to improve its finish. It uses its own software which is simplified by the company to provide the basics to what you need to build design.

Therefore, beginners will not be bogged down with options. Instead, they can create and practice confidently with little setting fluctuations available. The isolated approach can help users hone in on the basics before they start using other third-party software.

The Photon also uses USB and Ethernet to connect, but its Ethernet connectivity is comparatively slower than the Epax X1.

Epax X1 vs Anycubic Photon – Support

Both printer software will work with most major systems, such as Windows, Apple, and Linux. The slicing and anti-aliasing should remain consistent regardless of the system you use.

When it comes to their individual company support, both companies have excellent customer service to help you with any problems you may have. To contact, visit Anycubic Support or Epax Support.

Epax X1 vs Anycubic Photon – Pros and Cons

Epax X1 Pros

  • Solid metal construction
  • Clamshell lid secures the environment
  • High-quality, precise finish
  • Easy maintenance
  • Uses non-FEP film
  • Anti-aliasing mode
  • Easy plug-and-play set up
  • Friendly customer service available

Epax X1 Cons

  • Has a shorter warranty
  • Comparatively expensive

Anycubic Photon Pros

  • Delivers intricate designs with an overall smooth finish
  • Compact and durable built
  • Easy to use for users of all levels
  • Proprietary software with excellent customer service
  • Comparatively affordable

Anycubic Photon Cons

  • Bedplate and z-axis may need to be adjusted for optimal results
  • May lack flexibility for some users

Are there any alternatives?

Peopoly Phenom

Peopoly Phenom

If you’re looking for something professional and robust, the Peopoly Phenom is an excellent choice.

It is a rather expensive option, but it is faster than most other resin printers, whether that’s printing larger models or a plate full of small ones. Its efficiency comes from its customized light engine that distributes its light evenly and an in-built cooling system to ensure the quality of its results.

The printer uses ChiTuBox software so users can take advantage of this market’s reliable slicing software. This nifty printer is packed with features, providing you with a comprehensive package that should deliver on all your printing needs.

These printers are more for professionals or expert enthusiasts, but if you’re interested in resin printers, the Peopoly printers set a standard, unlike others.

Phrozen Sonic Mini

Phrozen Sonic Mini

As innovations within the 3D space continue, the Phorzen Sonic Mini is a fast, but smaller resin printer. It is a cost-effective option in terms of its initial investment cost and overall running costs as well.

While the Phrozen Sonic Mini cannot be used for large scale modeling, it does have the basics of what you need. It is the perfect option for 3D enthusiasts for miniature printing and other small projects. This is no compromise on quality or detail, instead, it’s an affordable option for those needing smaller build volume.

Frequently Asked Questions about Epax X1 and Anycubic Photon

What To Look For When Buying 3D Resin Printers?

Several of the above-discussed factors make up things you should look for. However, having the parameters categorized can help you stay objective. As such, here’s what look at when buying a 3D resin printer:
•Print Quality
•Print Speed
•Accuracy/Precision
•Self-leveling bed
•Durability
•Connectivity Options
•Noise
•Price
•Accessories
Lastly, and more importantly, a printer should work for you and your projects. You shouldn’t be scrambling to make your printer work for you or adjusting your projects around one. Therefore, take a look at all the above in light of your desired goals

Does Anycubic Photon and Epax X1 Come With Slicing Software?

Anycubic comes with its own proprietary slicing software. The company has been manufacturing 3d printers that have quickly become popular. Using their customer base and understanding, their proprietary software contains everything you need to get started.

Epax X1 uses the ever-popular third party software, ChiTuBox. It adds diversity and contains additional settings and options that the Anycubic’s slicing software lacks.

What Does Epax X1 and Anycubic Photon Come With?

The Epax X1 printers come with:
•ChiTuBox Software
•Replacement non-FEP Film
•Adapter
•2 Resin Filters
•USB stick
•Manual
The Anycubic Photon comes with:
•Gloves and mask
•Toolkit
•USB stick
•Scrapper
•Adapter
•Door Handle
•Resin Vat
•Screws
•Manual
•Resin (Optional purchase)

What, if any, Other Slicing Software Can Be Used With Anycubic Photon?

Aside from their own slicing software, both printers can be adapted to be used with other slicing software, such as
•Zortrax Z-Suite
•Photon Open Slicer
•Formware 3D
•Slic3r

Do I get a warranty with Epax X1 or Anycubic Photon?

Both companies come with their own warranty policies. To learn more, visit their respective website at Anycubic Warranty Policy or Epax Warranty Policy

Our Verdict: Epax X1 vs Anycubic Photon – Which is Better?

In conclusion, both the Epax X1 and the Anycubic Photon are popular printers due to their reliability and quality. They do meet all the criteria to be solid purchases for users. From their results to the product’s durability, both are excellent options you can’t go wrong with.

We recommend Anycubic Photon for those who want to get started with resin printing, but don’t mind a little customization. It is an affordable option that can be improved with a little work.

Whereas the Epax X1 is excellent for individuals that need the flexibility to work on various different projects without fussing the device too.

Anycubic Photon vs Photon S – Should You Upgrade?

The Anycubic Photon vs Photon S might be a tricky comparison to make given it’s the same printer, with a few upgrades. However, are those upgrades enough for you to switch over?

Resin printers have revolutionized the 3D printing space given their highly accurate results at a relatively affordable price. They’re an easy to use and safer alternative for beginners. Yet, it delivers high quality, smooth, and polished finish. Anycubic printers are no different.

If you’re looking to produce prototypes and products with fine details, Anycubic has a range of affordable printers that might work for you. Their Photon series is one of the most popular due to its versatility, durability, and cost.

Due to its success, the company introduced the Photon S that takes its counterpart to a new level. But, are their differences that significant? And, which one would be right for you?

This guide illustrates the differences between the Anycubic Photon and the Anycubic Photon S and explores which one is worth investing.

Main Differences Between Anycubic Photon vs Photon S

The main differences between Anycubic Photon vs Photon S are:

  • Anycubic Photon has a print speed of 10mm/h, whereas Anycubic Photon S has a slightly higher speed of 20mm/h
  • Anycubic Photon S has dual linear rails, whereas the Anycubic Photon has a single rod as its Z-axis
  • Anycubic Photon is available at a lower price, whereas the Anycubic Photon S is comparatively expensive
  • Anycubic Photon S uses a UV Matrix as a light source, whereas the Anycubic Photon has a UV LED source

Both models are highly rated resin printers; however, keep their main distinctions in mind as you go through the article to make the right purchasing decision for yourself.

Exploring Anycubic Photon and Anycubic Photon S features

The perfect 3D printer gives you the performance you need; therefore, let’s break down each model using a few practical categories to understand the difference between Anycubic Photon vs Photon S.

Design & Construction

Whether you’re new to 3D printing or transitioning from Fused Deposition Modeling (FDM) printers, understanding how resin printers work helps.

Anycubic Photon vs Photon S Design

You don’t need to be an expert, but having a basic understanding allows you to grasp the full potential and limitations of the device. Resin printers use ultraviolet (UV) light to harden liquid polymer on a layer-by-layer basis to bring your designs to life.

Each printer has a tray to pool photopolymer resin with UV light shining below. A moving platform adjusts, according to your input, to gradually build each layer. The entire printer is encased within its body to keep it insulated from dirt or dust while also preventing environmental light from affecting the resin.

The original Anycubic Photon has a sturdy metal body fitted with blue plexiglass. On the other hand, the updated Anycubic Photon S has a high-quality and heavy-duty plastic body with blue-amber plexiglass.

Which is better? Some may be inclined to go for the older, metal body. But using plastic in the newer model does not mean its cheaper in quality. The body remains quite durable, yet lighter weight than the former. All in all, in terms of its outer casing, you can’t go wrong with either.

However, the plexiglass color does make a slight difference. The blue-amber color of the newer model provides better UV blocking than the blue color. This means your resin will be less likely to dry up naturally in the printer pool. The original Anycubic Photon does not fall short, but you will need to be extra careful cleaning up.

Survey your workspace and judge the conditions you’ll be working under to make a decision between which factors make a difference to you.

Printing

As mentioned above, resin printers differ from traditional FDM 3D printers by exposing the resin to UV light. The printing process of the two models is similar, but there are subtle differences in their mechanics and results.

The Anycubic Photon uses a solo Z-axis rod that adjusts up and down to build the model layer-by-layer. This results in high-quality prints that can handle reasonably intricate designs with ease.

Anycubic Photon vs Photon S Priting

However, the Photon did receive complaints of its single rod being wobbly; often disturbing the model resulting in streaks or less smoothness.

Therefore, the Anycubic Photon S attempts to rectify its stability issue by changing its single Z-axis rod to a dual one. Consequently, the prints are much smoother and precise—even with smaller parts.

The Photon S has another slight advantage in the printing area as its build volume has been increased by 10 mm. Although the improvement is not significant enough to warrant an upgrade, if you have the original Photon.

Software

All Anycubic devices come with their slicing software. It equips users with the basics of all they need to operate their 3D printers. It allows you to generate models geared towards making detailed and precise designs.

Unlike traditional FDM software, each file is made up on multiple images that allow for constructing layered models.

Anycubic uses the same Slicer program for all its models. Therefore, regardless of the model you have, you’re receiving the same facilities and capabilities.

The print quality of the Photon S is overall better due to its hardware, as described above. But there is some reporting it has more software bugs as opposed to the Photon. Much like the quality differences, however, the issues are not prominent enough to warrant a clear-cut recommendation of either model.

FormWare Slicing Software

Post-Processing

Much like other aspects of a resin 3D printer, there is a slight learning curve for beginners for post-processing as well. It is a crucial aspect of ensuring your results are precise and durable.

After cleaning your model in an alcohol bath, use an ultrasonic cleaner for around 3 minutes using 91% alcohol. Subsequent to this, the model can be cured. Using a UV machine is the recommended way as direct sunlight may cause a reaction resulting in a burnt tint.

Without properly cleaning your device, the resin will harden within the device making the material and the machine’s pool bed unusable. Although the Photon S upgrades its plexiglass by adding a more amber tint, incoming light can still harden the resin. Therefore, drain all liquid and properly clean off any residue before storage to ensure your product’s life.

Specifications for Anycubic Photon and Photon S

Anycubic Photon Anycubic Photon S
Build Volume: 116 x 55 x 165 mm Build Volume: 116 x 65 x 165 mm
Software: Anycubic Slicing Software Software: Anycubic Slicing Software
Connectivity: USB Connectivity: USB
Layer Resolution: 25-100 microns Layer Resolution: 25-100 microns
Anti-aliasing: Yes Anti-aliasing: Yes
Z-axis: Single rod Z-axis: Dual rod

Comparing Anycubic Photon vs Photon S – Pricing

The 3D printing niche is still in its infancy, but innovations spring up routinely. Resin printing is in itself an innovation, which made 3D printing easier and more accessible. Unlike traditional heavy-duty printers, you can easily find resin printers at a fraction of the cost.

Moreover, Anycubic prides itself on its affordability and quality. The company focuses on making the space more inclusive to generate more creativity and unlock a person’s inner potential.

As such, the prices of both models are rather economical. However, there is a price distinction between Anycubic Photon and Photon S.

The Photon, being the older model, is considerably lower in price. You can also purchase resin along-with the Photon to use it right out of the box.

Anycubic Photon S Upgraded Pricing

On the other hand, the retail price of Anycubic Photon S is considerably more expensive, but it does come with additional resin and 2 FEP Film.

Therefore, the original Photon model has the upper hand when it comes to the price given it still delivers a quality finish with the same feature list.

When considering cost, you might want to keep 3D printing accessories in mind as well. This includes:

  • UV Resin
  • FEP Film
  • Additional accessories, such as a Quad-HD LCD Screen

Anycubic Photon vs Photon S – Ease of use

Anycubic is a well-known and established 3D printer manufacturer with a specialty in resin printers. Their devices are manufactured with the end user in mind to make the printing process as smooth as possible.

That being said, 3D resin printing is not a straight forward task to get started with. While being cost-effective for beginners, the device has a learning curve in order to unlock its potential. Once you understand the basics, however, it all comes rather simple and practical.

To help newcomers into the world of resin modeling, Anycubic has installed its easy to use plug-and-play software on a USB. Its software and firmware can also be found on the company’s website, along-with informative guides.

The product manual is detailed, and it explains each step you need to take to build your models like a pro. Each model comes with a handy LCD to help you determine each component is precise, down to the last few micrometers.

Additionally, if you face any issues, Anycubic has an adequate customer service team to help you along the way. Overall, ease of use might be slightly based on individual experiences; however, it focuses on helping you get your bearings until you’re confident.

Anycubic Photon vs Photon S – Support

As suggested above, Anycubic has accessible and friendly customer service that allows the company to proactive resolve user issues.

Additionally, a community of users of varying levels supports the product. Beginners to Advanced 3D modelers can use the Community Forum to troubleshoot their problems or discuss their findings.

For everything else, you have the company’s manuals and direct customer service features

Anycubic Photon vs Photon S – Pros and Cons

Anycubic Photon Pros

  • High quality 3D Resin Printer
  • Provides smooth and beautiful prints
  • Made from a solid metal body
  • Relatively affordable
  • Offers the same features as its updated counterpart

Anycubic Photon Cons

  • Touchscreen responsiveness needs work
  • Single Z-axis rod can wobble to disrupt the model design

Anycubic Photon S Pros

  • Smoother, faster, and more precise finish
  • Plastic exterior lowers value price without compromising on durability
  • Updated plexiglass for easy clean-up
  • Uses dual liner rod on Z-axis to provide greater stability and improve the finish

Anycubic Photon S Cons

  • Expensive with no additional benefits
  • Slight glossy finish
  • The plastic casing is an overall downgrade from its metal body.

Are there any alternatives?

Elegoo Mars

elegoo mars

The Elegoo Mars 3D resin printer works similar to the Anycubic Photon, and its most recommended alternative.

It offers an easy printing experience to the user using the same plate mechanics for consistently high-quality prints. Unlike the Photon series, however, the Elegoo Mars requires the build plate to be manually installed. All instructions are provided and the installation is an easy process, but it is not as plug-and-play as its counterpart initially.

Moreover, the Elegoo Mars comes with the ChiTu Box software which is easy to use and offers more flexibility than the Photon proprietary Slicing software. It allows you to build hollow models while providing robust support generation.

In terms of its price, the Elegoo Mars sits between the two Photon models so it could be an affordable alternative to the Photon S.

Wanhao D7

Wanhao D7

Wanhao D7 printer is also a comparative option worth looking into. It delivers similar high-quality results with a layer resolution of 35 microns.

Like the Elegoo Mars, the Wanhao D7 does not come with proprietary software. Instead, it provides access to the Creation Workshop. However this software is rather barebones, and most users tend to use alternative slicer software. Important to note: Its connectivity is through USB only.

The Wanhao D7 has a price comparative to the Anycubic Photon S while lacking some aspects. However, it does provide the same quality and could be an alternative that works for you.

Frequently Asked Questions about Anycubic Photon and Photon S

What Is a Resin 3D Printer?

Resin printers are an innovation that makes 3D technologies more affordable and accessible. Unlike FDM printers that use filaments, these printers use resins to create models on a layer-by-layer basis. It essentially cures liquid resin using UV light to build its structures.

As a result, the prints are more detailed and intricate while requiring less post-processing work. Overall, your printer preference depends on the projects you want to undertake, but a resin printer is a good option for beginners to get started with 3D printing.

Is the printing process slow with the Anycubic Photon or Photon S?

As with most resin printers, the printing process is rather slow as each layer needs to be built up. That said, the Photon S has slightly improved its speed given its UV matrix and increase in power.

Does Anycubic Come With Slicing Software?

Both Anycubic models include the company’s proprietary slicing software which provides you everything you need to get started. Alternatively, you can also use third-party softwares according to your preference.

What, if any, Other Slicing Softwares Can Be Used With Anycubic Photon?

Other Slicing softwares that can be used with Anycubic Photon devices include:
•Zortrax Z-Suite
•ChituBox
•Photon Open Slicer
•Formware 3D
•Slic3r

Do I get a warranty with Anycubic Photon or Anycubic Photon S?

Yes. Buying Anycubic Photon or Photon S from the company’s direct website or through authorized sellers (such as Amazon) qualifies you for warranty. To learn more, check out the company’s Warranty Policy.

Our Verdict: Anycubic Photon vs Anycubic Photon S – Which is better?

In short: The Anycubic Photon and Photon S are solid resin 3D printers that produce high-quality models and prototypes. While they have a learning curve, they enable 3D technologies to be accessible for beginners at a more affordable price.

The utility of 3D resin printers lies in their ability to provide the complete package, and the Anycubic Photon series definitely provides that. Each model comes with their signature Slicing software which allows you to manifest your designs.

So, which is better between the two?

The Photon S brings some improvements to the package in terms of its stability, speed, and overall finish. It builds upon some of the predecessor’s shortcomings and is a well-thought-out device. However, the differences aren’t massive enough to warrant upgrading unless you need a replacement.

Therefore our recommendation for 3D printing beginners is to purchase the Anycubic Photon with its similar feature list priced at a more affordable cost.

If you’re experienced with 3D printers, the Anycubic Photon S may be the better option, due to possible future firmware updates which might not be available for the older model.

Anycubic Chiron Review [2021]: Is It The Best Pick For You?

For most people, when they think about 3D prints, they often associate it with smaller objects such as an action figure, a small boat, or perhaps a tiny model of your house. But there are times when large-scale printers make more sense. The problem is that 3D printers with a huge build volume often means you pay an arm and a leg for the privilege of owning it.

Not with the Anycubic Chiron. This 3D printer shows the world that bigger printers need not be expensive. It’s priced at less than $500 but offers a wide range of features that you will typically find in an excellent 3D printer today. Plus it allows you to print bigger things.

Chiron Semi-auto Leveling 3D Printer | AnyCubic

Chiron printer assembly is very easy. Level the bed correctly and print anything.

Check Price Buy at Amazon.com
We earn a commission if you click this link and make a purchase at no additional cost to you.

Sounds like it’s too good to be true? Read on and find out. We will touch on the features and reasons why Anycubic Chiron is more than worth its price. We will also explore some alternatives to the Chiron, as well as help you decide on whether to buy this 3D printer or not.

Anycubic Chiron: What You Need to Know

The Anycubic Chiron 3D printer has a build volume of 15.7 by 15.7 by 17.7 inches (400 by 400 by 450 millimeters) allowing you to print large scale models with ease. What’s more, the printing platform works with most filaments. Your prints will adhere to the heated bed with ease, while it’s easy to pry them off the platform when it’s cold.

The short-distance extruder allows for a smooth release of the melted filaments. This process allows the printer to ensure higher print accuracy between 0.002 to 0.012 inches (0.05 to 0.3 millimeters).

This printer comes with a full-color touch display that allows you to control the settings and operate your printer. The user interface is intuitive and easy to figure out.

The Anycubic Chiron also comes with a filament sensor that will alert you if the printer runs out of filament or if it breaks while printing. Other features that you should know about the Anycubic Chiron include:

  • Technology: Fused Deposition Modeling
  • X, Y, Z positioning accuracy rated at 12.5, 12.5, and 2 microns
  • Nozzle diameter: 0.016 inches (0.4 millimeters)
  • Print speed: 0.79 to 3.94 inches per second (20 to 100 millimeters per second)
  • Compatible materials: PLA, ABS, HIPS, Wood, TPU
  • Ambient Operating Temperature: 46.4 to 104 degrees Fahrenheit (8 to 40 degrees Celsius)
  • Maximum extruder temperature: 500 degrees Fahrenheit (260 degrees Celsius)
  • Connectivity: Memory card and data cable

Pricing

Anycubic Chiron sells for around $430 and that comes with a pound (0.5 kilograms) of PLA filament. You can opt to order the printer with 5.5 pounds (2.5 kilograms) of filament for $50 more.

What’s in the Box

The Chiron comes to you with a bit of assembling necessary. The good news is that putting it together will take you 30 minutes to 1 hour at most. Plus, the package gives you everything you need to assemble the 3D printer, including:

  • 10 M5 Screws
  • Glove
  • PLA Filament
  • Pliers
  • Power cord
  • Scraper
  • SD card
  • SD Card reader
  • Tool set
  • Tweezer
  • USB cable
  • User manual

What You Would Like About the Anycubic Chiron

The Ultrabase Pro print bed with its microporous coating can really hold on to your models so they don’t topple over while printing is in progress. Plus, unlike other heated beds with a good hold, it’s easy to pry off the finished prints after you have let the bed cool down completely.

What’s more, the Anycubic Chiron works with a wide assortment of filaments so you can use the materials that you need. Everything is easy to do, from assembly to printing.

But this printer’s main selling point is the huge build volume without the expected expensive price tag.

What Might Turn You Off from the Anycubic Chiron

For those who feel clumsy, you might want to skip on the Chiron as you will need to assemble it before you can use it. The good news is that it’s pretty easy to figure out how to assemble the machine and the instructions help too.

While this printer offers automatic bed leveling, there are some issues. For one, you will need to manually adjust the bed first to make sure that it’s level. Calibrating the bed can be quite a pain as well, so it’s a shame that the auto bed leveling is not up to par with some of Chiron’s competitors.

Pros

  • Huge build volume
  • Removable stepper drivers
  • Ultrabase Pro bed is excellent
  • Intuitive user interface and touch display

Cons

  • Loud fans
  • Auto leveling needs work

Anycubic Chiron: The Bottom Line

The Anycubic Chiron gives you the chance to print large models without any problem. This printer has one of the biggest build volumes you can find right now. And because of that, you should know that you will need a big space to accommodate it as well.

Fully assembled, this printer measures 25.6 by 24.1 by 28.3 inches (651 by 612 by 720 millimeters). That’s right, it’s more than two feet all around.

There are some issues with the automatic bed leveling, but it’s something that you can probably remedy by doing what the manufacturer: do the adjustments manually at first.

Print quality can be excellent if you can find the right profiles for this printer. And with its below-$500 price tag and huge build volume, you will not regret buying this 3D printer.

Chiron Semi-auto Leveling 3D Printer | AnyCubic

Chiron printer assembly is very easy. Level the bed correctly and print anything.

Check Price Buy at Amazon.com
We earn a commission if you click this link and make a purchase at no additional cost to you.

Alternatives to the Anycubic Chiron

For those people who like to have their 3D printers come to them fully assembled, you should look at these products. The same goes for those who are looking for an alternative to the Chiron.

The good news is that there are options for you. In fact, there is quite a handful of 3D printers that offer huge build volumes at different price points.

1. Raise3D Pro2 Plus

With a jaw-dropping price tag at $6,000, Raise3D Pro2 Plus is sure to raise some eyebrows. However, all indicators seem that it has enough features and good things to justify that price.

For one, this 3D printer gives you a huge build volume of 12 by 12 by 23.8 inches (305 by 305 by 605 millimeters). While it can’t match the width and depth of prints that the Chiron can give you, it certainly allows you to significantly taller 3D objects.

What’s more, the Raise3D Pro2 Plus comes with electronic extruders. These dual extruders have retracting hot ends that can print even the most complicated parts. Plus you can also use multiple filaments.

This printer also uses interchangeable nozzles with diameters of 0.008 inches (0.2 millimeters) that translates to even finer details. This is also a very accurate and precise 3D printer with astounding print quality. It boasts of a layer resolution of 0.01 millimeters.

You will also like the seven-inch touchscreen on this printer, which allows you to easily control the printer, change the settings, and see what’s going on. You can review the status of the printing, even see how much work has been done so far, as well as get other information that you may need.

Further, because the extruders can get as hot as 572 degrees Fahrenheit (300 degrees Celsius), it works with more filaments such as:

  • ABS
  • ASA
  • HIPS
  • Nylon
  • PC
  • PETG
  • PLA
  • PP
  • PVA
  • TPE
  • TPU
  • Carbon fiber infused
  • Glass fiber infused
  • Metal fill
  • Wood fill

You can also do things wirelessly such as upload a design to the printer over the air. You can also control and monitor your prints even when you’re halfway across the world. The 3D printer also safeguards the air quality in the room where it’s working with the HEPA air filter included in the machine.

Lastly, you’d like the excellent build plate system that is made with aerospace-grade aluminum. This plate system can get very hot to ensure better adhesion.

Pros

  • Resumes printing after a power loss
  • Tells you when you’ve run out fo filament
  • Can be accessed, tracked, and controlled remotely
  • connectivity options include Wi-Fi, USB port, live camera, and LAN
  • Works with a wide assortment of filaments
  • Consistently excellent print quality
  • The fully enclosed print area for better heat management
  • Integrated software
  • Heated magnetic aluminum bed
  • HEPA filter

Cons

  • Expensive
  • Has a large footprint measuring 24.4 by 23.2 by 43.5 inches (620 by 590 by 1,105 millimeters)

Raise3D Pro2 Plus 3D Printer | Matter Hackers

Second generation power loss resume - don't lose a print when you lose power.

Check price Buy at Amazon.com
We earn a commission if you click this link and make a purchase at no additional cost to you.

2. Modix Big-60

The Modix Big-60 gives you a huge build volume at 23.62 by 23.62 by 23.62 inches (600 by 600 by 600 millimeters). That’s roughly two feet all around and that’s definitely larger than the build volumes of both Anycubic Chiron and Raise3D Pro2 Plus. It retails at $3,700.

You will need to assemble it yourself and it might require a couple of people to finish. Fully assembled, this machine measures 36 by 42 by 53 inches (906 by 1,060, by 1,356 millimeters) so you need to earmark space for this printer.

The Modix Big-60 has gone through three iterations. The latest version 3 comes with a lot of new features that you will love. You get a professional 3D printer that has a black and red color scheme. It uses high-quality aluminum and other quality materials for its construction and the V3 has the E3D Aero extruder.

This printer has one extruder, but you can set it up so that it can work with a dual-extruder setup that allows you to print with two filaments.

The V6 Volcano hot end features interchangeable nozzles. The printer can work with a variety of materials, even the rare and exotic ones. What’s more, you can fit it with different nozzles as long as the diameter falls between 0.02 to 0.05 inches (0.4 to 1.2 millimeters).

The touchscreen interface is huge at seven inches. You can use the interface to operate the printer, as well as to see the status of your prints in real-time. the Modix Big-60 can also connect to your Wi-Fi network, allowing you to control the machine from your computer or mobile phone.

Pros

  • Automatic bed leveling
  • One of the largest build volumes around
  • Heated bed featuring a dual-zone heater
  • Filament sensor

Cons

  • Expensive
  • Needs to be assembled

3. Creality CR-10S Pro V2

The second version of the Creality CR-10S Pro gives you a build volume of 11.8 by 11.8 by 15.7 inches (300 by 300 by 400 millimeters), which is smaller than the build volume you see on the Anycubic Chiron. Plus at $630, this 3D printer is more expensive as well.

But why is it on this list despite the smaller build volume and more expensive price tag? It’s because this 3D printer is known to be reliable and powerful.

For one, it looks great with its sleek and modern design. the wires are safely hidden away so it doesn’t look cluttered. Printing on the Creality CR-10S Pro V2 is also very easy.

The printer comes with a powerful 480-watt Mean Well power supply, Capricon filament tubing that is heat resistant, a filament sensor, and an easy to understand user interface. This printer can also resume printing

Pros

  • Automatic bed leveling
  • Mean Well power supply
  • Easy to use

Cons

  • Some placements are not intuitive, such as the power switch located towards the back and the input slots are placed towards the front
  • Your print sometimes stick to the print bed

Creality 3D CR-10S Pro DIY 3D Printer Kit | Creality 3D Official

HD touch screen and large viewing angles, printing status, functions and parameter setting are clearly displayed, New Friendly UI, easy to use and learn.

Check Price Buy at Amazon.com
We earn a commission if you click this link and make a purchase at no additional cost to you.

Frequently Asked Questions

In this section, we try to answer some of the questions that readers often ask us about large 3D printers.

1. Aside from the Anycubic Chiron, are there any other large 3D printers that sell for less than $1,000?

You have options like the Tronxy X5ST-500 and the Creality CR-10 S5 that has a build volume of 19.7 by 19.7 by 23.6 inches (500 by 500 by 600 millimeters) and 19.7 by 19.7 by 19.7 inches (500 by 500 by 500 millimeters), respectively. Both of these single-extruder 3D printers accept third-party filaments and costs around $700 to $800.

You can also check out the Tronxy X5SA, which has a build volume of 13 by 13 by 15.7 inches (330 by 330 by 400 millimeters) and sells for less than $400.

3D Printer Tronxy X5ST-500 Creality CR-10 S5 Tronxy X5SA
Price $700 $800 $360
Build Volume (mm) 500 by 500 by 600 500 by 500 by 500 330 by 330 by 400
Extruder Heads 1 1 1
Min. Layer Height 100 μm 100 μm 40 μm
Printing Speed 100 mm/s 200 mm/s 100 mm/s
Open Source No Software No
Third-party Filament Yes Yes Yes
Heated Bed Yes Yes Yes
Filament Diameter 1.75 mm 1.75 mm 1.75 mm


TRONXY X5SA 3D Printer | 3D Printers Online Store

This is a Core XY structure design with full belt transmission, higher stability and printing precision, guarantee the quality of the model; Dual Z-axis design, increase the load capacity of the hot bed, reduce errors in printing, and print more finely.

Check Price Buy at Amazon.com
We earn a commission if you click this link and make a purchase at no additional cost to you.

2. What is the biggest 3D printer that you can own today?

While the world of 3D printers changes constantly, several professional 3D printers can now print larger models. For instance, there’s the BigRep PRO that has a build size of 40.2 by 38.2 by 38.6 inches (1020 by 970 by 980 millimeters).

This printer comes with a dual metering extrusion system and the spool chamber is safe from humidity. It also has a closed print chamber. The company doesn’t mention pricing details for this machine, but you can spend at least $150,000 on this machine.

Another huge 3D printer is the Cosine Additive AM1 that gives you a build volume of 43.3 by 33.5 by 33.5 inches (1,100 by 850 by 850 millimeters).

3. Why do you even need a large scale printer?

Would you need to print really large objects? Yes, there are instances when you will want to have a large scale printer, such as:

  • Single-body parts. For instance, if you’re printing a cosplay costume, you can probably get away with printing out smaller parts and then assembling it later on. However, these will not be as durable as printing a particular part as a single piece.
  • Reduced weight. Take for example you want to 3D print a stool, which is usually made with wood. If you print a stool using plastics, the resulting object will be a whole lot lighter than a wooden stool.
  • Faster prints when compared to your ordinary hobbyist 3D printer. On top of being more durable, being able to use a large 3D printer will make the whole process faster because you don’t have to cut up your large model into smaller components. You also save time from having to assemble these smaller parts.
  • Batch printing is easier. With a large printer, you can save time when you print in batches. Say you need 100 pieces of an iPhone case. With ordinary printers, you will probably need to print in several batches to get those 100 pieces. Large scale printer needs significantly fewer rounds.

Should You Buy the Anycubic Chiron?

The Anycubic Chiron is an FDM printer that can give you high-quality prints and has the features that you will expect from a high-end and more expensive printer.

It works with a wide range of filaments, has a heated bed that can automatically level itself, and a full-color touch display for the user interface. In short, it gives you everything that a reasonably priced 3D printer can give, plus some extras.

But what sets it apart is big the build volume is. With the Anycubic Chiron, you can print 3D models that are more than a feet big all around. Plus, this printer is a fast worker as well, clocking in at 0.79 inches per second for high-resolution prints but can go as fast as four inches per second.

You get all that while dropping only less than $500 for this printer. There are better printers, such as the Modix Big-60 and the Raise3D Pro2 Plus. However, these machines will see you dropping some serious money.

So for its build volume, features offered, and affordable pricing, you can’t go wrong with the Anycubic Chiron.

Chiron Semi-auto Leveling 3D Printer | AnyCubic

Chiron printer assembly is very easy. Level the bed correctly and print anything.

Check Price Buy at Amazon.com
We earn a commission if you click this link and make a purchase at no additional cost to you.

Anycubic i3 Mega vs Ender 3 Compared: Which One Is Right For You?

Anycubic i3 Mega vs Ender 3

Anycubic i3 Mega vs Ender 3 is a tough comparison to make – especially if you’re just starting out with FDM printers.

The world of 3D printing is filled with innovative technology to help unlock your creative potential. However, with so many options available, things can get a little confusing whether you’re new to 3D printing or expanding your horizons.

Fused Deposition Modeling, or FDM, is an excellent option to create high-quality prototype models. They are also relatively inexpensive compared to other Stereolithography Apparatus (SLA) printers, which is why FDM printers are so popular.

That said, its popularity means there are a number of manufacturers all with different claims on why their products are right for you. It can quickly get difficult to understand what and why a particular characteristic of a product should matter to you.

If you’re stuck indecisive between the Anycubic i3 Mega and Creality Ender 3, we’re here to help. This comparison guide explores everything you need to know about each product–their pros, cons, and all the details in between. By its end, we’re confident you’ll be able to make a decision regarding your preference.

Without further ado, let’s get into the comparison.

Main Differences Between Anycubic i3 Mega vs Ender 3

The main differences between Anycubic i3 Mega vs Ender 3 are:

  • Anycubic i3 Mega has a more user-friendly and straight-forward assembly, whereas more time is required to set up the Ender 3
  • Anycubic i3 Mega has a build volume of 210 x 210 x 205 mm, whereas Ender 3 has a larger build volume of 220 x 220 x 250 mm
  • Anycubic i3 Mega is more expensive, whereas Ender 3 is a comparatively more affordable FDM printer
  • Anycubic i3 Mega has a lower print speed resulting in more processing time, whereas Ender 3 has a higher printer speed
i3 Mega 3D Printer | AnyCubic

The Anycubic i3 Mega is a solid, metal-framed 3D printer that comes mostly assembled. Assembly is easy and takes only a few minutes. It is capable of producing high quality prints. Stable construction and fine layer resolution down to 0.05 mm. It supports multiple filament materials, including PLA, ABS, High Impact Polystyrene (HIPS) and wood.

Check Price Buy at Amazon.com
We earn a commission if you click this link and make a purchase at no additional cost to you.

However, these differences only paint a portion of what each product has to offer and why you might want to pick one over the other. Therefore, you make your final decision, go through our detailed comparison to make a purchase you can be confident in.

” volume=”70″]

Exploring Anycubic i3 Mega and Ender 3 features

Your ultimate decision should be dictated by your preference and the projects you wish to undertake. But, there are a few key factors you need to be laid out in front of you to figure out which printer is right for the job.

Let’s jump right in.

Design & Construction

FDM printers are a great consumer-level option as per current 3D technologies. It’s fast, low-cost, and is able to build sturdy models. These printers extrude thermoplastic filament from its heated nozzle, to melt the material on its flat platform. It builds its models layer-by-layer adjusting the nozzle as it needs.

There are two main kinds of filaments you can use with FDM printers: Acrylonitrile Butadiene Styrene (ABS), Polylactic Acid (PLA), Polyethylene terephthalate (PTEG), high impact polystyrene (HIPS), Thermoplastic polyurethane (TPU), and Wood (or wood-infused PLA).

Most FDM users will use only one type of filament in each of their projects, but the options may or may not be a feature you want to have. That said, both these printers are highly rated by PLA users as being one of the best.

Moving on to the specifics.

The Anycubic i3 Mega is built from a rigid, metal frame that lends to its stability while providing the printing process with a stable base. This Anycubic 3D Printer comes mostly assembled, except for a few screws that need to be installed. It is, however, an easy process that a quick read of the manual can help with. Additionally, its Ultrabase print bed provides added stability during the printing process.

The printer also has double x limit switches which provide more level accuracy. It prints in resolutions as fine as 0.05 mm or as large as 0.3 mm. It can be used with the following materials:

  • PLA,
  • ABS,
  • HIPS,
  • PETG,
  • Wood

On the other hand, the Creality Ender 3 has a larger build volume of 220 x 220 x 250 mm. Unlike the i3 Mega’s advanced Ultrabase print bed, it has a standard aluminum build plate that heats up. Ender 3 offers fine details up to 0.1 mm to around 0.4 mm large.

The Ender 3 can be used with the following materials:

  • ABS,
  • PLA
  • TPU
  • PETG

Notably, the i3 Mega uses a touch screen interface, whereas the Ender 3 has a monochrome screen that is controlled using a turn-knob.

Overall, both printers have a solid base with durable construction. The Ender 3 is clearly designed for larger prototypes. It may work as an excellent 3D printer for schools. Whereas, the i3 Mega is more suitable for smaller prints.

Great Affordable Alternative
Official Creality Ender 3 3D Printer | Creality 3D Official

For most users, I recommend starting with this Creality Ender 3 Prusa i3 model here. It produces more consistent quality prints and is MUCH easier to assemble, let alone being more affordable. A clear choice for me.

Buy via Creality Direct Buy at Amazon.com
We earn a commission if you click this link and make a purchase at no additional cost to you.

Printing

Unlike SLA printers, the prints from an FDM printer are not as intricate. However, they still are able to capture a decent amount of detail and deliver a smooth finish. This is why it is considered an ideal option for prototyping.

Ender 3 delivers remarkable quality prints for its price which have a smooth, solid finish. There is an issue, however, the plate bed of the printer is lacking in a little refinement. Being a standard plate bed, it isn’t as stable and would definitely benefit from having an auto-leveling feature.

Moreover, the nozzle may end up slamming into the bed which could ruin the layer’s progression. Aka, you might have to start all over again. But, a few adjustments and awareness of the issue should keep it problem-free for the most part.

Much like the other Anycubic printers, the i3 Mega lives up to its mid-tier status. Its build plate, construction, and stability allow the printer to replicate its quality with its print.

Therefore, the Anycubic i3 Mega is definitely a winner in terms of print quality between the two devices.

Software

The software of a printer can be a determinant of what you can do with the hardware of a printer. A 3D printer could be built with the best, innovative technologies, but fall short in terms of its software capabilities. It could alter what you can design and how well the printer is able to transform it into a reality.

Ender 3 uses a popular third-part slicing software known as Cura. It does come with a standard version, but you can download the latest version from their website. The software can build your model which is then transferred for the printer to read through a USB or a micro-SD card.

Anycubic has a similar slicing software based on Cura, but it uses a custom version. Likewise, the prototype file is transferred through a USB or SD card.

In the case of software, it comes down to personal preference. Ender 3’s Cura is a market-leading up-to-date product that potentially has more flexibility. But, Anycubic’s software is specifically designed and tested against their product. Additionally, you can receive direct support from the company, if needed.

User-Friendly Features

Lastly, coming towards which printer is more user-friendly. Regardless of which one you pick, you’re likely looking for an affordable 3D printer that fits your budget without feeling like a compromise. Therefore, it helps if your device is user friendly with an as little learning curve as required.

As we alluded to above, the i3 Mega has a simple assembly process with a few screws and an inspection of the manual to get you through it. The Ender 3, however, has a more lengthy assembly process. This means you might have to take some time to understand which part goes where making it less of a plug-and-play printer.

Moreover, the main feature offered by Ender 3 is their Resume Print option. This essentially protects your print from any sudden damage from having a power outage or filament issue.

The i3 Mega also offers this, but it has a few other user-friendly options. Such as its Ultrabase heated plate for even stability, touchscreen interface, and a number of accessories to help you along the process. It may come down to what you specifically need, but the i3 Mega overall has a better user experience to offer.

Specifications for Anycubic i3 Mega vs Ender 3

Anycubic i3 MegaEnder 3
Build Volume: 220 x 220 x 250 mmBuild Volume: 210 x 210 x 205 mm
Software: Cura Slicing Software (custom(Software: Cura Slicing Software
Connectivity: USB, SD cardConnectivity: USB, Micro-SD card
Layer Resolution: 50 – 300 micronsLayer Resolution: 100 – 400 microns
Print Speed: 20-60 mm/sPrint Speed: 180 mm/s
Filament Types: ABS, PLA, HIPS, PETG, WoodFilament Types: ABS, PLA, TPU, PETG

Comparing Anycubic i3 Mega vs Ender 3 – Pricing

If you haven’t already checked out their price, can you tell which one is cheaper?

Price is not a measure of quality, but it does help our budget. When considering purchasing any 3D printer, remember its associated costs. From the accessories, you need to its materials. This should help you figure out a budget for your purchase. And, you can always upgrade when you need a more professional set-up.

Both Anycubic i3 Mega and Ender 3 are affordable options that would suit a variety of different functions. But, when it comes to the market price, the Anycubic i3 Mega is comparatively more expensive. The Anycubic is a better option if you’re looking into 3D miniature printing.

Important to note, however, that the i3 Mega has better features, is more user-friendly with finer detail capabilities.

The much cheaper alternative, Ender 3, still provides high-quality finishes and only comparatively falls slightly short. Its print speed, however, is much higher. Therefore if you’re looking for quick prints, the latter could be the right option for you. Also, if you’re starting out this might be a good affordable way to dip your toes in the world of 3D printing.

Anycubic i3 Mega vs Ender 3 – Ease of use

Looking at the overall package both devices offer, it is clear that the Anycubic i3 Mega is easier to use. It has a professional set-up with a focus on delivering fine detailed, quality prints and software the company has tested.

The Ender 3, on the other hand, is a good printer, but it does require a little more finessing than the former printer. It is also considered ideal for hobbyists who are enthused by their 3D printer to unlock its full potential by trying out different options.

Anycubic i3 Mega vs Ender 3 – Support

If you’re concerned about receiving support, both companies have you covered with easy and quick customer service. To get in touch with their representatives, visit Anycubic Support or Creality Support.

Moreover, both companies have a fantastic and ever-growing community of 3D enthusiasts of various levels. You can talk to like-minded individuals to sort out most issues and get to printing beautifully constructed models.

Anycubic i3 Mega vs Ender 3 – Pros and Cons

Anycubic i3 Mega Pros

  • Relatively inexpensive for the astonishing quality it provides
  • Straight-forward, simple set up
  • Mechanical filament sensor
  • Touch-screen
  • Ultrabase Heated Bed for even heating and stability
  • Works well with PLA, PETG, HIPS, ABS, and Wood

Anycubic i3 Mega Cons

  • Cannot be upgraded
  • Noisy
i3 Mega 3D Printer | AnyCubic

The Anycubic i3 Mega is a solid, metal-framed 3D printer that comes mostly assembled. Assembly is easy and takes only a few minutes. It is capable of producing high quality prints. Stable construction and fine layer resolution down to 0.05 mm. It supports multiple filament materials, including PLA, ABS, High Impact Polystyrene (HIPS) and wood.

Check Price Buy at Amazon.com
We earn a commission if you click this link and make a purchase at no additional cost to you.

Creality Ender 3 Pros

  • Affordable options as an FDM printer
  • Large print volume
  • High quality, but quick printing
  • Customizable to fix any issues
  • Can be used with a number of materials including PLA, TPU, ABS, and PETG
  • Comes with industry-popular Cura Slicing software
  • Solid built

Creality Ender 3 Cons

  • The plate bed needs to be adjusted
  • Printing quality can be improved
Great Affordable Alternative
Official Creality Ender 3 3D Printer | Creality 3D Official

For most users, I recommend starting with this Creality Ender 3 Prusa i3 model here. It produces more consistent quality prints and is MUCH easier to assemble, let alone being more affordable. A clear choice for me.

Buy via Creality Direct Buy at Amazon.com
We earn a commission if you click this link and make a purchase at no additional cost to you.

Are there any alternatives?

Prusa i3 MK3S

It is a little known secret that most FDM printers are fashioned to be a low budget option to the Prusa printers. Therefore, if you have the cash to spend, it might be a good option for you to check out.

The Pursa i3 MK3S has an impressive build volume of 250 x 210 x 200 m and layer resolution up to 50 microns. Therefore, you can get some really fine detail and high-quality prints from the device.

Its structure and design stand out due to their stability and accuracy. The company listens to the consumer to upgrade their devices to enhance user experience and provide better results.

It uses a USB drive or SD card to transfer prints while using their own custom PursaSlicer. The software is rich with features and the company frequently updates it.

However, it is compatible with other third-party software if the users wish to try others. Overall, if you have the cash to spend, this award-winning FDM printer might be right for you.

The Original PRUSA I3 MK3S | Amazon
$1,949.99

Basic features magnetic PEI Spring steel sheet EINSY RAMBo Base plate Silent Trinamic drivers with 256 microstepping Maximum travel speed: 7.874 in per second. The Original Prusa i3 MK3S+ is the latest version of their award-winning 3D printers.

Buy at Amazon.com Learn More
We earn a commission if you click this link and make a purchase at no additional cost to you.
06/19/2021 12:24 pm GMT

Monoprice MP Select Mini V2

If you’re looking to stay on a budget, the Monoprice MP Select Mini is a good option as well.

Monoprice manufactures a host of electronics and the MP select mini is one of their forays in the 3D printing space. It is rather small with a build volume of 120 x 120 x 120 mm, but it can be a good option for miniature or other smaller models.

An impressive feature of the printer includes the addition of WiFi connectivity along-with USB and Micro-SD cards. It also is backed by a community and large following so getting support for various projects would not be difficult. The company recommends using Cura or Repetier-Host as slicing software when working with the device, but other users do mention its capabilities with other software as well.

Due to all this, the Monoprice MP Select Mini V2 is an excellent option for you to peek at.

Monoprice Select Mini V2 | Amazon

This printer not only comes fully assembled, it has already been calibrated at the factory. All you have to do is perform a quick check to verify that the print bed is still leveled, in case it shifted during shipping, then load the included MicroSDTM card, load some filament, and start printing the preloaded model.

Buy at Amazon.com Learn More
We earn a commission if you click this link and make a purchase at no additional cost to you.

FAQs About Anycubic i3 Mega and Ender 3

What Are FDM Prints And What Can You Do With Them?

The Fused Deposition Modeling printer, also known as the Fused Filament Fabrication (FFF), printer is a 3D technology that builds models using a continuous flow of filament.

It typically uses thermoplastic material in the forms of PLA, ABS, PTEG, HIPS, TPU, or wood. The material is fed to the device’s nozzle or extruder head that deposits it on a heated bedplate. The nozzle moves according to its input to build models on a layer-by-layer basis. A small amount of thermoplastic material is deposited on each new layer.
The end result is a smooth, uniform, and sturdy model.

FDM printers are typically used to create a product or part prototypes. It can also be used for producing some end-use products depending on its purpose. They have also been used in the food industry to produce packaging and as 3D modeling printers in the medical industry.

What To Look For When Buying FDM Printers?

You might want to consider different elements depending on the projects you want to complete. However, we suggest keeping the following questions in mind when purchasing an FDM printer:
•What build volume do I need?
•How crucial is layer resolution to my project?
•Can the bedplate auto-level for ensuring stability or will adjustments need to be made?
•Are there any build upgrades required?
•What kind of nozzle or heated bed plate does the device have?
•What connectivity options are available?
•Which software can I use with the device?
•Does the company offer spare parts?
•What post-processing procedures are required?
•What is the device’s print speed?
•How budget-friendly is the device for you?

What Do Anycubic i3 Mega and Ender 3 Come With?

The Anycubic i3 Mega printers come with:
•Pliers
•Screws
•Scraper
•Tool set
•Card reader
•Glove
•SD Card
•User manual
•Tweezer
•Power cord
•USB cable

The Ender 3 comes with:
•Pliers
•Screws
•Toolkit
•Screwdriver
•Wrench
•Scraper
•Ties
•Manual

What, if any, Other Slicing Software Can Be Used With Anycubic i3 Mega or Ender 3?

Aside from their own slicing software, both printers can be adapted to be used with other slicing software, such as
•Netfabb Standard
•PrusaSlicer
•OctoPrint
•MatterControl
•Simplify3D
•MakerBot Print

Do I get a warranty with Anycubic i3 Mega or Ender 3?

Both companies come with their own warranty policies. To learn more, visit their respective website at Anycubic Warranty Policy or Creality Warranty Policy.

Our Verdict: Anycubic i3 Mega vs Ender 3 – Which is better?

To conclude our Anycubic i3 Mega vs Ender 3 comparison, both printers are good and affordable FDM printing options. Although there are differences in quality, build volume, and overall functionality; however, that shows their different applications.

As such, we recommend Anycubic i3 Mega to be a suitable option for medical or other product prototype building. It can help you and your clients visualize designs. Or, alternatively, it can reliably build small parts required by manufacturers and other companies. In fact, if we had to pick one, we’d go with the Anycubic i3 Mega for its versatility and wider application.

i3 Mega 3D Printer | AnyCubic

The Anycubic i3 Mega is a solid, metal-framed 3D printer that comes mostly assembled. Assembly is easy and takes only a few minutes. It is capable of producing high quality prints. Stable construction and fine layer resolution down to 0.05 mm. It supports multiple filament materials, including PLA, ABS, High Impact Polystyrene (HIPS) and wood.

Check Price Buy at Amazon.com
We earn a commission if you click this link and make a purchase at no additional cost to you.

The Ender 3 is ideal for the hobbyist. Individuals looking to upgrade their cosplays using 3D printing, for example, could greatly benefit from it. Alternatively, beginners and those at the start of their learning journey could find Ender 3 to be a good affordable option. That also makes it ideal for school or college students to elevate their skills.

The Anycubic Predator Review: Is It A Good Buy in 2021?

Build volumes pretty much dictate how big a 3D model you can print with a 3D printer. Bigger build volumes mean that you can print objects that can cover a bigger area, or if you need to put it together into one bigger object, you’d need to have less moving parts.

What’s more, if you’re currently using a mini printer, having access to one that has a bigger build volume means that you can print your current models on a larger scale with more details.

Usually, when you see a 3D printer that has a large build volume, you assume that it’s expensive. Not the Anycubic Predator. This Delta-style printer has a sizable build volume and a frame that’s made with quality materials but with a price tag that you will certainly love.

What are the things that you should know about this Anycubic 3D printer? Are there some downsides to owning an Anycubic Predator? Are there any alternatives that you can consider? Further, should you buy the Anycubic Predator? Read on and find out.

Anycubic Predator: What You Need to Know

A do-it-yourself 3D printer kit, the Anycubic Predator is made with solid metal, making it very durable. The frame is also very stable so you don’t have to worry about the 3D printer shaking too much when in use.

The Anycubic Predator has a build volume of 14.6 by 14.6 by 17.9 inches (370 by 370 by 455 millimeters), which is larger than most 3D printers out there. It has a layer resolution of anywhere from 0.05 to 0.3 millimeters and positioning accuracy of 0.0125 millimeters on all three axes.

What’s more, it can use any PLA, ABS, HIPS, wood filled, or TPU filaments that have diameters of 0.4 to 1.75 millimeters. Print speed range from 20 to 150 mm per second (0.79 to 5.9 inches per second).

The Predator comes with an auto leveler that keeps track of 37 points. Plus it can do real-time adjustments, without you having to do anything. The nozzle height is also automatically adjusted in real-time. Other features of the Predator include:

  • Ultrabase Pro: The print bed, which can hold the models in place but still be easily removed. The bed is very durable.
  • Filament sensor: Can alert you when filaments run out or when they break.
  • Touch display: Operate your printer with ease with the full-color control panel with its intuitive user interface.
  • Resume: The printer can resume printing after it’s been interrupted by a power trip. You don’t have to worry about wasted prints that take a long time to finish.

What’s in the Box

The good news is that Anycubic has included everything you need to print and maintain your printer in the box, including the:

  • 10 screws
  • Card reader
  • Gloves
  • PLA filament
  • Plier
  • Scraper
  • SD card
  • Toolset
  • Tweezers
  • USB cables
  • User manual

That means that you can assemble your printer the moment it arrives, and then print your first model shortly thereafter.

What You Would Like About the Anycubic Predator

The Anycubic Predator is a well-built, sturdy, and stable 3D printer that feels rock solid. It does not rock when printing and the extrusions are quite uniform and work as they should. The hardware you see here is excellent, made with quality materials.

What Can Be Better

Some users complain about the Ultrabase Pro because the objects being printed don’t really adhere to the print bed. A good workaround is to use regular school glue before you print anything. You will also need to let the print bed cool off before you remove the print to avoid damaging it. You should not even try to remove it using the scraper that comes with the package.

What some people do not like is that the firmware is not open source. This means that you will not be able to tinker with it, or you might have a challenge doing so.

The biggest tradeoff, however, is the lack of support. If you need to buy parts for your Predator, you might find that the customer service is not that responsive. They do not provide shipping updates, tracking numbers, or general feedback for your purchase.

Also, this printer is huge at 22.8 by 20.5 by 40.2 inches (580 by 520 by 1,020 millimeters). You will really need to find a place for it on your worktable.

Anycubic Predator: The Bottom Line

The Anycubic Predator is an excellent printer with all the great technologies you will expect to find in a more expensive model. It’s also perfect for those who like to tinker with their 3D printers because you will need to assemble it and then twiddle with it to make it better. It uses sturdy and durable materials, offers a sizable print volume, and print quality is okay.

It is, however, bogged by the lack of customer service. That is, it’s a good printer until you need to have some parts replaced.

Anycubic Predator Alternatives & Competitors

If you’re looking for a budget 3D printer that doesn’t scrimp on the quality, the Anycubic Predator can be the right choice for you. But it’s not the only affordable printer out there that offers a huge build volume, excellent prints, and an attractively low price tag.

1. Geeetech A20M 3D Printer

The Geeetech A20M 3D Printer is a 3D printer kit that has an aluminum alloy body and uses a Bowden extruder. Assembly is quite easy, especially if you have another person to help you.

Perhaps, the biggest feature that will intrigue you is the mix-color feature. The A20M has two slots for two different filaments, but it uses only one nozzle. This means that you can blend colors while printing.

You can easily achieve color gradation or having the spectrum effect, using the slow transition from one color to another. You can also have the printer print in the two colors without blending it, making it seem like you’ve changed the filament midway.

What You’d Like About the Geeetech A29M

If you assemble this 3D printer right, you will probably have no problems with it. It’s very stable, and the materials used are durable. It has a high-quality look that makes it more expensive than its price tag.

The color mix feature is a good addition as well. What’s more, the electronics are at the bottom, which makes the printer even more stable.

What Can Be Better

Some users might find it difficult to level the bed, as it can wobble too much if not installed properly. Also, the user interface is not that intuitive. For some reason, the company didn’t include a touch display, so you have to tweak the setting using a dial.

Having to turn the dial is a departure from the tap and click type of interaction that we’re all used to by now. Plus, it might not be easy to find the features that you need.

Geeetech A20M 3D Printer | Amazon
$379.00

Geeetech A20M 3D printer delivers mix-color objects and greatly enriches your 3D printing life. Keeping the good performance of Geeetech 3D printers, it aims to provide users with quality printout and good printing experience.

Buy at Amazon.com Learn More
We earn a commission if you click this link and make a purchase at no additional cost to you.
06/19/2021 08:09 am GMT

Geeetech A20M: The Bottom Line

Compared to Anycubic Predator, the Geeetech A20M has a smaller footprint at 17.4 by 17.6 by 18.9 inches (442 by 447 by 480 millimeters), still bigger than your regular desktop FDM printer. It also has a smaller build volume at 10 by 10 by 10 inches (255 millimeters all around).

However, it is also cheaper than the Predator and delivers pretty much similar print quality.

Barring some mechanical issues such as having loose or tight adjustments to the print bed, the Geeetech A20M is an affordable 3D printer kit that does a good job overall.

Pros

  • Sizable build volume
  • Print quality is fine and detailed
  • Can support two filaments with color mix features
  • Affordable

Cons

  • If not properly installed, the base can be wobbly

2. Artillery Sidewinder X1

The Artillery Sidewinder X1 comes from a new company that started offering 3D printers in late 2018. That’s both a good and a bad thing. To be honest, the company’s first products received a lot of bad feedback. But the nice thing about Artillery is that they took these feedbacks and incorporated changes into their later products.

The Sidewinder X1 features some nifty features such as a silent set of fans and the equally noiseless motherboard. It also has a heated bed and a direct drive system. It boasts of a build volume that measures 11.8 by 11.8 by 15.7 inches (300 by 300 by 400 millimeters) on a body that measures 21.7 by 15.9 by 25.2 inches (550 by 405 by 640 millimeters).

The chassis is very sturdy and durable. And it looks great as well. One of the notable design differences that the Sidewinder X1 has is the use of ribbon cables. The ribbon cables reduce the cluttered look of loose cables used by similar printers.

The heated print bed is made with a porous ceramic that is covered by a glass protector. It only takes about 45 seconds to heat the bed to 140 degrees Fahrenheit (60 degrees Celcius).

What You Would Like About the Artillery Sidewinder X1

The Artillery Sidewinder X1 is a budget printer that doesn’t look or work like one. It has quality materials that make up the sturdy frame and a fast-heating print bed.

What’s more, it features a direct drive setup that is rare if you consider its price range. The user interface is intuitive and the 3.5-inch (89 millimeters) touch display is easy to see. Installation and setup is a breeze and fast.

What You Might Not Like About the Artillery Sidewinder X1

One of the things that this 3D printer lacks is the sensors that will allow you to automatically level the bed. Instead, you have to do some manually leveling.

There are also concerns about the durability of some of the printer’s components. For instance, you might find that the ribbon cables can break over time. What’s more, the printer does wobble when you print something tall using certain filaments.

Artillery Sidewinder X1 3D Printer Kit | 3D Printer Online Store

Artillery Sidewinder X1 is a all-in-one cartesian 3D printer with ultra quiet stepper drivers, direct drive extruder, dual Z axis, AC heated bed, TFT touch screen.

Check Price Buy at Amazon.com
We earn a commission if you click this link and make a purchase at no additional cost to you.

Should You Choose This Printer over the Anycubic Predator?

There are some things that the Sidewinder X1 has that you cannot find in other affordable Cartesian 3D printer. It’s refreshing to see a direct drive extruder as well as a directly heated print bed on a budget device. It has a sleek look and can work quietly, while also delivering a decent quality for your prints.

Compared to the Anycubic Predator, this printer has a smaller build volume. Plus, you will probably need to fiddle with the settings a bit to get the best quality prints out of this device. The Sidewinder X1 is also more affordable than the Predator.

Pros

  • Well-designed and sleek-looking
  • It heats up quickly allowing you to start printing in a matter of seconds
  • Silent worker
  • The helpful online user community

Cons

  • The filament holder needs to be replaced
  • Uneven heat

3. Qidi Tech X Plus

The Qidi Tech X Plus is yet one of those budget printers that aims to surprise you with quality prints. You can get layers that are as thin as 50 microns. you can also use a wide assortment of filaments.

The Qidi Tech X Plus has two extruders, filament compartments, and a double-sided bed. These accessories allow you to easily change out the various components so you can get the perfect prints depending on your preferred filament.

What’s more, it gives you several options on how to connect Wi-Fi, tethered and untethered USB, and Ethernet. The build volume for the Qidi Tech X Plus is the smallest out of this bunch, measuring only 7.9 by 7.9 by 10.6 inches (200.7 by 200.7 by 269.2 millimeters).

What You Would Like About the Qidi Tech X Plus

There are a lot of nifty features on this printer that you will like. There’s the two-extruder setup, where you can use the A Extruder for general printing materials such as TPU, ABS, or PLA. There’s also the B Extruder for special filaments such as carbon fiber, PC, and nylon.

The difference lies in the maximum temperature that each extruder can get. The A Extruder can get as hot as 500 degrees Fahrenheit (260 degrees Celsius) while the second extruder can get as hot as 572 degrees Fahrenheit (300 degrees Celsius)

It also has a dual-sided print bed that can handle different sets of materials as well. There are two filament holders as well.

Plus, unlike other printers in this roundup, the Qidi Tech X Plus arrives fully assembled, so you don’t have to worry about screwing things together and all that. It’s also fully enclosed, so noise levels are kept at a very quiet 40 decibels.

What You Might Not Like About the Qidi Tech X Plus

Qidi Tech has a language barrier problem in that they seem to be struggling to find English speakers and writers who can write their instructions pretty well. The instructions included in the package are confusing and some steps are missing, making it difficult to follow.

Even their customer service and website can be quite confusing. Thankfully, the QiDi Tech X Plus is easily assembled following what you can understand in the manual.

Also, some online tutorials and forums can help you figure things out if you’re stuck.

QIDI TECH X-Plus 3D Printer | Amazon
$749.00

The QIDI TECH X-plus combines all the features you want in a 3D printer like quiet printing, air purification, Wi-Fi connection, one button quick leveling, breakpoint printing, etc.

Buy at Amazon.com Learn More
We earn a commission if you click this link and make a purchase at no additional cost to you.
06/19/2021 08:14 am GMT

Qidi Tech X Plus: The Bottom Line

When it comes to budget printers, Qidi Tech X Plus shows you that you can save money and still expect quality prints. This 3D printer makes it easier for you to work with a wide variety of filaments without having to go through the trouble of manually changing out the print bed and extruders.

What’s more, there’s no assembly required, so you can start printing once you get it out of the box.

Pros

  • You can use a wide range of filaments
  • Easy to set up and use
  • Good quality prints

Cons

  • Badly written documentation and customer service representatives can use English lessons

FAQs

1. What is an extruder?

The extruder is one of the most important components of 3D printers. The extruder pushes the filament to the hot end where it is melted.

2. What is the difference between a direct extruder and a Bowden extruder?

A direct extruder is one that is attached to the hot end itself. It’s part of the print head and delivers the filament straight to the hot end.
Because the filament travels for a short distance, direct extruders have better extrusion and retraction and the filament is more responsive to it. It also doesn’t take too much power from the stepper motor. Further, direct extruders work with more filaments, even the abrasive and flexible ones.
A Bowden extruder, on the other hand, is not attached to the print head, but someplace else, usually the printer body. It uses a tube to deliver the filament to the hot end.
Because of this, the print head is much lighter, more accurate, and faster because it doesn’t carry the additional weight of the extruder. Products that use a Bowden extruder tend to have higher quality or faster prints.

3. Do you need an auto-leveling 3D printer?

Making sure that the print bed is level is one of the key considerations when you work with a 3D printer. You can do this manually, or you can rely on a printer’s automatic leveling capabilities to do the job for you.
Auto leveling uses sensors attached to the print head to check several points on the bed. It will then send this information to the printer’s computer so that it could adjust the nozzles as it works.
As such, it makes your life a whole lot easier, and your 3D printing jobs a whole lot faster. It’s also a must for beginners who may not have an idea on how to level the printing beds.

4. What are Delta and Cartesian 3D printers?

A Cartesian-style printer uses the Cartesian coordinate system. A Cartesian printer moves linearly on both X and Y axes. They can move:
– Up and down
– Front to back
– Left to right
Cartesian printers can have moving parts that are inordinately heavy and can shake your printer strongly enough to dislodge prints from the bed. It can sometimes lead to inaccurate prints.
It’s also close to impossible for Cartesian printers to change directions in an instant. However, Cartesian printers do shine with horizontal prints and are easier to understand. It’s also user friendly and cheaper than Delta printers in general.

Delta Printers

Delta printers, for its part, have three arms that can go from one point to another but also change the angles as it moves. Delta printers are much lighter than Cartesian mechanisms, which helps make it responsive to changes in angles and directions.

Delta printers use fewer parts, so there’s less chance that it will break down, but it takes up too much space as well. Delta printers are also more lightweight than a similar Cartesian printer and it’s very easy to upgrade or maintain. It also allows for fast and accurate printing.

Should You Buy the Anycubic Predator?

For its price, the Anycubic Predator is surprisingly an excellent printer that delivers finely detailed prints and has a huge build size. You can use this 3D printer for bigger models. It’s very stable and the construction is solid.

There are competitors for the Anycubic Predator, but it wins in one way or another that makes this printer very easy to recommend. For instance, the Sidewinder X1 can give the Predator a run for its money, but it doesn’t have automatic bed leveling.

The Qidi Tech X Plus is better suited for semi-professional print jobs, but it’s more expensive than the Predator and has a smaller build volume. Meanwhile, the Geeetech A20M has a more affordable price tag, but also a smaller build volume.

Further Reading on Anycubic 3D Printers & Competitors: